Search the Community
Showing results for tags 'for-sale'.
-
Bought this one a little while ago with plans to mod it pretty good but just haven't had time. Gun was bought new and has not been fired outside of the factory test fire. I did use one of the mags for a ranges session in on of my other CZs so you can see it has been used. If that bothers you I can swap out a nib 16 rd mag for the used one. Feel free to PM with any questions, not sure what else to tell you about a brand new gun $550
-
Ruger LC9s w/ Kydex IWB Holster Features: Ruger LC9s, a compact single stack 9mm handgun w/thumb safety. Fingergrip extension floorplate. Includes everything pictured. IWB holster comes w/interchangeable clips for IWB or IWB tuckable concealed carry. In excellent condition, well-suited for concealed carry. Price: $300
-
I have a Walther PPS M2 that I’m looking to sell. I have everything that came with the gun new. Around 500 rounds through the gun just not for me. Looking to find something to carry everyday. I also have two holsters one cost me around $50 it’s a generic leather holster, the other is the Urban Carry G3 holster that cost me close to $100. Asking $525 or best offer for the whole lot. Looking to sell in the Gallatin/Hendersonville area.
-
I am selling/trading: Multicam Safariland 6378 USN-2832 QLS fork and ALS Holster with the correct M3 light to fit that I ran w/ Glock 19 in. If interested please let me know. $150 Takes it (SOLD) (2) Glock 19 15 round mags with +5 Taran Tactical Ext's $70 for both (SOLD) Zev Treaded Barrel that will fit any Gen Glock 19. $175.00
-
20 gauge RETAY MASAI MARA automatic in camo. Shot 1 time last season and comes with case and all accessories including a Para cord timber strap $$$$$$$ 850 $$$$$$$ (Attached ad shows new for $1400) Message me if you want to see pics etc.
-
Great for stretching your back... $75 Can meet in middle TN around Spring Hill, Fairview or Dickson area.
-
for-sale Alice Gear - Belt, Canteen, Butt Pack, Suspenders $25
Snaveba posted a topic in Gear Classifieds
Surplus ALICE gear I have picked up. Includes web belt, canteen and holder, butt pack and suspenders. All probably came from Freidman’s in Nashville Located in Nashville $25 -
NIB old stock been discontinued for a long time. Found recently during move. can text photos. $120 obo FTF Mt Juliet or will ship for actual.
-
Used a little, but bought a big scuba tank that I use now so don't fill my small air rifle tanks with this now. Works good. $150. Meet near Chapel Hill.
-
Liquidating some Glock gear from the stash. Greater Nashville. Glock Vogel kit for Gen5 9mm platform: https://glocktriggers.com/product/vogel/, 1 available Glock Vogel kit for Gen 4 40s&w platform: https://glocktriggers.com/product/vogel/, 1 available Glock Edge kit for Gen4 9mm platform: https://glocktriggers.com/product/edge/, 1 available Glock Guardian for Gen5 9mm platform: https://glocktriggers.com/product/guardian/, 1 available $100/ea Viridian Reactor 5 for Glock42 (pretty sure this is Gen1 and the link provided is for Gen2, never mounted or used): https://viridianweapontech.com/reactor-r5-gen2 $100
-
It's brand new, never opened. I paid $76.95 plus shipping, here is your chance to get it cheaper. $50 picked up or plus shipping cost to you. Walther DEFENSE PDP 2.0 to Trijicon RMR / SRO / Holosun 407C / 507C / 507Comp / 508T / C&H EDC-XL / COMP THIS PLATE IS FOR THE 2.0 CUT FROM WALTHER AND WILL NOT WORK WITH THE 1.0! PLEASE REFERENCE THE SECOND PHOTO TO DETERMINE YOUR CUT BEFORE PURCHASE. THESE PLATES ARE FOR THE 2.0 CUT! PLEASE VERIFY YOU HAVE A PDP 2.0 FIRST! The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers. Most of our plates feature a patented stainless steel T-Nut which provide an industry leading six to seven threads of engagement. Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate. SPECIFICATION: Material: Plates are made from 6061 aluminum. All mounting hardware is Stainless Steel Finish: Plates are MIL-SPEC Type III Hard Anodized – Black
-
ad closed WTS or Trade 9mm S&W SD9VE w/ kydex holster $270
KyleB posted a topic in Firearms Classifieds
priced to sell today! $270 call me (979)328-6291 Smith & Wesson SD9 VE 9mm Luger was offered it on a deal for one of my generators. Previous owner claimed he put 1 mag through it and stuffed it in his dresser. I personally have put 1 mag through it to test it before getting it. Shoots pretty good, very light, surprisingly easy to carry/conceal, magazine holds 16rnds, the kydex holster is for left-hand draw Always willing to trade. We can +/-$ to even the trade if necessary. Interested in another pistol, revolvers, shotguns, long rifles, utility/motorcycle trailer, good condition wood stoves (going to put one in my RV) anything off-road, motorcycles.- 13 replies
-
- trading post
- for-sale
-
(and 1 more)
Tagged with:
-
Fired a couple rounds through it and never used again.sold
-
Gone. Thanks tgo
-
SOLD
-
It would only upload two pics, but send me your phone number and I can send more, can take pics of whatever you want to see....206275 miles currently, this was my daughters car for many years, I gave her my Ford Escape in trade as she needed a bit nicer car. Car drives great and as far as I know, here is what it needs.....Windshield, oil change, 2 tires and hood struts to keep hood open. 4 of the original FJ rims will also be included, the current wheels are 17". The car is filthy dirty, looks like a good 1/2 day job with a water hose and some elbow grease, she has 4 kids, two are young and messy. Seems these sell in the 13-15 range, but I'm just offering it up for 10,000 cash as a quick sale, we have the title. You can contact me here or text me at 901-288-8777. Thanks Chuck Evans
-
Spingfield M1 Garand. The receiver has a 6 digit number that was produced in October of 1942. There is a small SA cartouche on the left side and the stock has the same serial number as the receiver. $2000 OBO
-
I bought these under the impression that they were OEM mags, but they turned out to be aftermarket. From some research it seems they are from the mid 2000s. Unsure of the actual brand. I bought them as partials (they were not fully assembled and we're missing pieces) and I added all OEM springs and most of them are OEM followers, so I guess they are somewhat OEM lol. Anyway, I have a ton of these and don't them all, trying to make some money back. They have a decent lockup in my sp5 and seem to function fine. All 8 for $240
-
What you see is a gorgeous but rarely shot HENRY IN .357/38. This gun shows signs of being pulled in and out of the safe but still looks amazing!!
-
-
Brand New Shadow System DR920 CBT 9MM BLK/BLK - $800 Action striker fired Barrel 4.5" Finish Black Nitride Length 7.63" Sights FS: Green Tritium RS:Black Caliber 9mm Capacity 17 + 1 Magazine 2 17 rd. Rate Of Twist 1-in-10" Stock Frame Grips Polymer Frame Black Frame Polymer Frame Additional Feature 1 Optics Ready Combat Slide Additional Feature 2 Spiral Fluted Black Barrel Additional Feature 3 Flat Face Aluminum Trigger
-
Local Sales in Chattanooga/Cleveland area. Edited for price drop. Trades welcome. Ruger PC Charger 9mm SOLD. Factory box 10rnd and 30rnd magazine. Smith and Wesson 43C .22 SOLD w/ factory box Sig Sauer P938 9mm $625 $500 OBO 2 mags and factory case Lee Enfield .303 cal rifle $700 - $600 prod date 1918 SOLD Ruger P90 .45 cal $350 $275 OBO Factory case 6 Magazines. Ruger P89 9mm $325 $275 OBO Factory Case 6 magazines Stand Manufacturing DP12 14 rd $950 $800 OBO SOLD