Daniel

Magpul I mean.

It is what the new angled foregrip they have is for. They teach it In their carbine vids also.

He was being facetious. I met Mr Pope. Not impressed. He was actually ignorant of the carry law regarding restaurants as passed last year and proceeded to argue about it.

The kickstand is awesome.

I want one. I want the new iPhone but the HTC EVO 4G is probably going to be my next phone. HTC EVO 4G is Sprint's Android-powered knight in superphone armor, we go hands-on -- Engadget

I was in a meeting for the last two hours...

I work behind there.

This is the funniest one to me... Mexicans are from mexico.. they are not a race. Hispanics are from all over South and Central America not a single country. The same goes for Chinese. They are not a race they are people from the country of China. Further than that they are not all the same lol. They have a very wide range of ethnic and cultural backgrounds.

It was their blood, sweat and tears that produced a nation as great as this once was. Apparently only white people had anything to do with this nation. Our people are under attack and have been for quite sometime. We are on the verge of annihilation. Rather through financial enslavement, disease, cultural/social poisoning or by flat being bred out of existence, the posterity that is rightfully ours is being circumvented. What he is saying here is that white people are under attack.. Not Americans. White people only. White people are being targeted for annihilation. Is wrong for me to want a nation for my people? We often here that Israel has a right to exist and that the Jews have need of a nation for themselves. The Chinese, the Mexicans, and most other races have their own nations. The white man deserves his own nation free of other races is what I take this to mean. that doesn't change the fact that illegal immigration, affirmative action programs, and the debasing of the most skilled demographic the workforce has to offer are contributors to accelerating national decline. And the catalyst for this is the central banking system, which is owned and controlled primarily by Jews. The jewish people are somehow responsible for illegal immigration, affirmative action, and the debasing of the most skilled demographic of the workforce? Oh yeah, and that part about white men being cowards, I agree with him. White men are a disappointment concerning order in the family, in government, in business, in education, and so on. We don't even have order in our own households anymore, how can we be expected have order in our society? This is not a race issue at all. But I am completely wrong on this. He was basing none of this on his racist views.

Also, since you are new here Im going to give you a pass once on Rule number 1. that you can locate here. Tennessee Gun Owners - FAQ: General Information I have bolded the pertinent sentence. Act accordingly.

It appears to me he asked me to do it.

I left them so that people can see what will not be allowed to continue. You can read for yourself what he wrote and what I will not allow. If I remove it what will you know about the reason for his departure? I didnt ban hgunner until he asked to be. Get over it.

omg at me looking inguinal cutaneous candidiasis up and finding something oh so terrible on this site. | Welcome To Mycology Online

This dude lives in southern mid TN. He joined the board and someone happened to post that pic and he was like oh yeah thats me btw.

http://www.tngunowners.com/forums/gunsmithing-troubleshooting/38577-saiga-7-62-conversion-tutorial-pic-heavy.html

***continued*** You should now be ready to start the permanent changes. Just above the trigger on the right side are two pins that need to be drilled just a little to remove the bent out edges. I used a hand drill with a 3/16 bit going pretty slowly since I didn’t have a vice to hold it steady. You then use a punch and a hammer to remove the pins. The trigger and this Y shaped piece should come free at this point. There is a fairly long spring called the retention spring. It is located approximately in the same location as the trigger. Pull it out from the rear. You can then tap out the axis pins. Keep these along with all of the springs. I just kept all of the parts in a box until I was complete just to be sure. ***I missed a couple of pieces falling out here and didnt take a pic at the time.*** The next thing to be removed will be the safety lever.Just rotate it up and to the side to slide it out. You should have the mainspring and the hammer left. Just left them up and out. Here is what we have removed so far. I thought that was it until I tipped the receiver over and the bolt hold open (BHO) + spring dropped out. Here is an inside view of two of the rivets we will have to remove next. They are the round pieces in the center. There is one more at the left side. I moved into my garage and got my dremel. I am pretty terrible with the thing and don’t have much practice so I probably used the wrong wheels to do the job but I did get it done. The first rivet is just behind the trigger guard. The next is under the trigger guard and the last is just behind the mag catch. Once I had ground the rivets down I gently pried up on the plate to remove it. That still left the three rivets in the holes. I tried grinding on them some more and ended up just drilling them a little and then knocking them out with some punches. At this point you should be ready to install your own parts.

-Preface- First of all I want to thank Smith. He helped me a ton between PMs and then finally me calling him with questions as I got stuck in some parts. His Saiga conversion links were also a tremendous help. I read several threads over at forum.Saiga-12.com also. As I looked at some tutorials I decided to document my work so I could use them to show what I had done if I screwed something up. It ended up being a much simpler process than I anticipated but I think its just the unknown that was the problem. After I started I decided that instead of sending people to the saiga-12 forum we should be able to have our own tutorial and so I will show the first part of my conversion. I took photos of my parts being added but thats more of a personal choice and more apt to be different depending on which stock/furniture you go with. I will post them anyway just not right this minute as it's getting late already. _____________________________________________ I had been thinking of getting a Kalashnikov style rifle for the last few months. I have seen other people’s conversions so I decided to go with a Saiga. I picked up a rifle thinking I would do the rest over a period of time but instead I haven’t been able to wait. While on vacation I spent my free time looking up different stocks and parts I can install on my rifle. I knew I wanted to go with a pistol grip and be able to use surplus magazines. This requires modifying the rifle. This first post will be removing the OEM rifle parts to get down to the receiver to prepare for adding your own items. Here is the stock rifle: The first step I took (I am no expert by any means) was to lay the rifle down and remove the hand guard. I had to tap gently on the hand guard to get it loose at this point. I just put the tip of the screw driver on the plastic and tapped it a couple of times. I then removed the top cover by pushing the button in and lifting up. Next, push the recoil spring assembly forward, then up and back. If the hammer is not lowered at this point, push it back to lock it in place. Now remove the bolt and bolt carrier assembly by pulling it all the way to the rear and lifting up and back. The next step is not necessary but I did it during mine so I am listing it. Just forward of the rear sight leaf on the right side is a small latch (I do not know the proper name) that releases the gas tube. It should be rotated up. You can then lift out the gas tube. To remove the stock you need to remove three screws. Once they are all removed you then just pull the stock to the rear to remove. Again I had to tap with my screw driver and a hammer lightly. ***continued in next post***

Who would that have been?

Done.

We will just have to agree to disagree then. I made it known to the powers that be that I intended to nip in the bud any further racially motivated comments by gts. If in 30 days he decides to return he can do so. As he said himself "....The fact that we tolerate things that are wrong, for the sake of political correctness and 'not wanting to be offensive,' is wrong....." I was tolerating his BS and tbh I don't have to.

Why would you think it's a threat?

Thats pretty damn badass.

THIS. I have had to go like two or three times while at work in the last couple of years and I make damn sure I go to the one on the far side of the building that is always empty. I went one time in elementary school and that was it. If I had to go I was going home to do it.

Or an assassin. Well, maybe you have to use the full middle name in that case.

JHatmaker made a post for this month also.. At the former Owl Hollow site.