DJTC45

That's what I'm working on now, almost got it done. I've got a UMP 25rnd Mag coming in with the stock block and a couple other things. I'll finish that up once it gets here. Now I just got to figure out the vents next.

I got the UMP Lower fit to the USC Upper, I took a Round File and used the old USC Lower as a guide and marked it with some tape. Lightly filed the Hooks on the UMP Lower till I got it fit up to the USC upper, turned out pretty good, next will be enlarging the Mag portion of the USC Upper to be able to use the UMP Double Stack Mag and lay out the Vents and figure out how to cut them and all that is left is to put it all back together and check functions before coloring the Grey USC Upper to Black to match everything else. So far it's been a good project, can't wait to get it done. I'm going to leave the 16"USC Bbl. for now still deciding if I want to go the form 1 route. Stay tuned for the finished project. Thanks for looking.

I bought this H&K USC 45acp last week. Got to reading and searching for some upgrades that I could do. I purchased a new Complete UMP Lower, Stock Block to add a Folding stock to it, XS Tritium Front Sight, and a few other things.

Nice blades, if you ever make the #1 with the OD Green handel PM me I'd like to have one. Great Knives by a great maker, keep up the great work.

Back to the top. PRICE REDUCED TO $1050 CASH FTF. Thanks for looking, let's give this one a new home.

Back up.

Back to the top, this one needs a new home. Thanks for looking.

This is SOLD.

I can always send it to you, just a thought.

I have searched both of those smiths and the majority of their builds were 2 5/8"Bbl's they did do some 3" also. But to clarify my add I never said it was built by either, just that some others had commented it " Looked like", and I said: "I know that a number of other gunsmiths did this also".That's why I posted that I don't know who done it, but it is well done, I don't want someone to think it was done by those two.

Some more pictures.

Here's another one you don't see often. $1500 CASH FTF. This started out a 1980 THE 1955 MODEL TARGET it's Bbl. has been shortened to 3" THE 1955 TARGET MODEL was not stamped on the Bbl. it's my understanding that most were not Re-Stamped due to the 3"Bbl. and the N Frame Square Butt was converted to the K Frame Round Butt so K Frame Grips are what fit it. No Box. I've had a few S&W pepole say that it could be a Jovino or Austin Behlert but I do know that a few other gunsmith did this type of conversations in the late 60' to the late 80's. I don't know for sure who done the work, but it was done correctly and looks good. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin and N Nashville area's, but I can drive half way to meet if your serious about buying it. Thanks for looking. Here's some pictures of it. There is some marks on the right side of the Bbl. from taking it out of the safe and has the S&W Cylinder Turn Ring on it as shown in pics. Rnd. Count is unknown but from the pictures it wasn't fired much from what I can tell.

Back up, price reduction. $700 CASH FTF.

This is SPF. Thanks TGO.

Back up to the top. Thanks for the comments, this is truly a great S&W 22lr. I have never fired it, and from the looks of it the previous owner didn't shoot it much from what he told me, it belong to his father.

Back up. The Picture above is not mine, don't know why he posted a picture of his revolver in response to my add. Thanks.

This has SOLD!!!!! about 3 months ago. Sorry for not updating the add.

Here's a Wilson Combat AR 10 308cal Super Sniper Complete Upper and Bolt with no Foward Assist This is done in their Burnt Bronze Finish. 20" Wilson Combat Heavy Bbl. Wilson Combat Aluminum Hand Guard with two Rails, the Complete Bolt is Nickel Boron Finish. $700 CASH FTF. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin, and N Nashville area's. Can drive to meet half way if farther out than the areas listed. Thanks for looking. Stock SOLD locally.

Here's my 1927 22/32 Heavy Frame 22lr. This one is in great shape, Orginal Grips No Box. REDUSED PRICE TO $1050 CASH F-F, I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin and Nashville area. I can drive a little way and meet halfway if any farther than the areas I listed. Please PM me any questions or if you need some more pictures. Thanks for looking.

Price Reduced. Back up for the week. For those who don't know the Kim Ahrends Grips are around $200+ if you can even find them since they aren't made anymore. Thanks for looking.

Back up for the week. Thanks for looking.

That one cleaned up good. They are interesting shotguns.

Thank's, I still have a few more custom calls that were made for me by Peck Martin of Martin Brothers Calls out of WVA. He passed away a couple of years ago from lung cancer just about six months after I got my Cancer Diagnosis, I sure miss him and his calls he would call or email me every year when the WTF Convention was over at Opryland and he always had a couple of special calls he would save for me and one other guy that collected his calls.

Here's a Smith & Wesson 24-3 3" Bbl. 44spl built by Smith & Wesson for Lew Horton Distributors has a set of KimAhrends grips on it I had laying around and the orginal factory Finger Grove Grips, Box, Paperwork and a Letter from Lew Horton Distributors stating this gun was made in 1984 and is number 787 out of 5000 shipped from Smith & Wesson to Lew Horton Distributor between 1983-1985 Price reduced was $1885, now Asking $1675 CASH F-F. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin and Nashville area for a FTF transaction, but I can drive a little to a halfway point to do the deal, just tell me where you live at if it's farther away than the N Nashville area. Please PM me any questions or if you need some more pictures. Thanks for looking.

This is a good deal on a great gun. GLWS.