Search the Community

All are the same blank made from 1/8" thick 1084 carbon steel. 9" OAL with a 4" cutting edge. All have thumb jimping, brass pins and come with combo leather/kydex sheath shown. They are $85 each shipped. 1. IPE handle with G10 accent and liners. 2. African mahogany with G10 accent and liners. 3. SOLD!!! Bog oak with G10 accent and liners. 4. SOLD!!! Desert ironwood and G10 accent and liners. 5. Walnut with G10 accent and liners. 6. SOLD!!!! Roasted curly maple and G10 accent and liners. Thanks for lookin'!!

Rock island. Model 14. In good. Shape. has a flash hider stock has some scratches accurate it’s bolt action it would make a good starter gun shoots good price 160.00. In Loudon meet in west Knoxville or Maryville thanks

This Zastava Mauser was manufactured in Yugoslavia in the early 50s. It was acquired from Cherry’s Fine Guns in Greensboro NC and has been in climate controlled storage for 15 years. Comes with matching bayonet and scabbard, sling, case, 195 rounds of standard 8mm ammo in stripper clips, ammo can, and 9 rounds of red and green tracer 8mm ammo. If you have questions or would like additional photos, please ask. I’d consider partial trades for a Springfield XD series, M&P 9, or similar CC-suitable 9mm sidearm. I’m in Nashville but travel to Knoxville and parts east from time to time.

$100 - two - Ruger factory sealed, Blued steel, 30-round, .223 Rem. caliber magazine for Mini-14. FTF or $12 shipping Cleaning out the safe, no trades needed please. location: Smyrna, TN come get it them anytime after 5pm, give me a PM for directions Sorry, I'm not driving to meet anywhere except for the Smyrna Police station. Too many instances so I'm keeping it safe and legit for all parties. Thanks,

Looking for a Walther WMP ,Volquartesen scorpion in 22 mag, or a m&p5.7

My nephew is looking for a.45 acp. 1911. Nothing fancy. Just a basic gun. Prefer in west end of state. So what do you have in the back of the cabinet that you don’t shoot. Thanks for looking.

Add closed

Marlin m99 a1 22lr. This is made to look like an m1 carbine. These are getting hard to find. It is in pretty decent shape for its age. It does have some dings in the wood. Asking 425.00 or trade on other guns. I can add cash or a ruger lcp 380 with laser for the right trade. Located in Lancing TN but will be in West Knoxville tomorrow (Wednesday)

Ruger lcp 380 with one mag. It has a pocket clip as well as a laser. It is in good shape. I'm looking to trade for other guns. No blackpowder or archery. I also have cash or a Marlin 22 rife I can add for the right trade. I'm located in Lancing TN but will be in West Knoxville tomorrow (Wednesday).

Sold

'Like New' condition. Less than 100 rds fired. 357 magnum, model 5460. In original box. Serial # dated 2022. $500 in Clarksville/Pleasant View area. No trades.

Like new Walther Q4 sf non -optics model comes with box and 3 magazines. 1 magazine has a Taran Tactical plus 5 base plate, spring and follower. please text 615-450-4613 if interested. $950.00 firm and reduced

Nice Tavor X95. Comes with many Manticore extras including Optimus forend, buttpad, gasket cover, and charging handle (not installed). It also has a brand new Q cherry bomb compensator. All original parts and box included. $1800.00 Trades interests include 2011s and military style semi-auto rifles. If interested i can be texted at 615-450-4613

Hi folks, I'm looking to purchase another LCR in .38 spl. I purchased one here a few years back and love it. I shoot it at least once a week (25-50 rounds). I haven't logged my round count, but I know it's over 3K. It's holding up well, is still tight, and the B/C gap is unchanged...but at this rate I'll eventually shoot it to death...probably... Maybe not, but I'd like another anyway. I already a .22 LCR and .327 LCR so I'm not interested in those at this moment. But for the right price? Maybe Now, the challenging part. I would prefer a face to face purchase in East TN, Knoxville would be best. I'm not in a hurry or anything. But as I'm about to go shoot it again in a bit the thought about a backup to this great little revolver entered my mind. Just PM me or post here. ETA 5/6/23 Also looking for a 9mm LCR. Thanks in advance.

Available is a factory built Bravo Company 12.5" upper receiver group. Barrel is a 12.5" chrome lined, carbine gas govt. profile, rail is a 10" mcmr. Comes with an a2 installed. Upper is like new, less than 100 rounds fired. Does not come with a bcg or charging handle. Asking $550 ftf in and around the Murfreesboro area. If you want it shipped send me a pm and we can work it out. This is cross posted.

Not

If you know AR-10's you'll know the Armalite AR-10 was the original 7.62 AR-10. Worth more with the optic but asking $1000 cash. Have 4 mags i'm included a couple in original package as you'll see in photo. Very Good condition. Great rig, I just don't shoot this one and would rather move it to someone who will use it or want a unique setup for their collection. Eugene Stoner’s ArmaLite AR-10 design chambered in 7.62 NATO was the design his company submitted to the US Army, who was looking to replace the M1 Garand. By 1957, the AR-10 made a late appearance in the military trials. Unfortunately, this firearm had a steel sleeved aluminum barrel and the design suffered a burst barrel during a military shooting torture test, damaging the company’s reputation and causing it to lose out on the military contract to the M14. But it wouldn’t take long for the AR design to experience a resurgence and the AR-10 would continue production. The ArmaLite AR-10 T continues that lineage of hefty reliable firearms without losing any of the traditional high quality Armalite is known for. This is a true SUB-MOA rifle built with the finest quality one can find on the market. With a Top Tier Krieger Barrel on an Armalite foundation you know you can trust, this is sure to be one of the most accurate and satisfying to shoot rifles on the range. Leupold Vari-x III 6.5 - 20 x 50 mm Optic Stainless Bull Barrel 1:10 Twist The buttstock is an A2 style polymer buttstock with sling swivel and a trap door in the checkered buttplate for a storage compartment.The handguard is a round aluminum free float handguard with sling stud in the belly. The LOP measures 14.5” from the front of the trigger to the back of the buttplate. The stock rates in about Excellent overall condition. There is some light handling wear. There are no chips or cracks. There are some light scratches on the buttstock.

ad closed

Kahles K18i - asking $2400 cash 1-8x24i I haven't bought the gun I was going to mount this to so I'm going to sell it. Bought brand new and just never mounted. If you know Kahles you know what you're looking at. Optimized for 3-Gun and IPSC matches Ultra-wide field of view, 8 x zoom and true 1 x magnification Integrated throw levers in 2 alternative sizes with infinitely adjustable positions Extra-bright day/night illumination in 2nd focal plane with MAX LIGHT function for extreme backlight situations Special reticles for 3-Gun and IPSC, designed with the support of recognized pro-shooters Designed by the inventors of riflescopes, Kahles, the K18i 1-8x24i delivers unmatched performance. With a slim 30mm main tube, a 24mm objective lens, and a lightweight of only 19.5 oz, the K16i will complement any rifle. Like all Kahles riflescopes, the K18i provides durability, accuracy, and repeatability that is beyond compare. To enhance the optical performance, the lenses are treated with an OILPHOBIC coating to prevent fingerprints and smudge marks from obstructing your view and a Kahles-AMV achromatic coating to provide maximum light and image transmission. With the extra-bright day Illuminated 3GR Reticle on the second focal plane, the Kahles K18i is favored for IPSC and 3 Gun shooting. To ensure that your riflescope will survive even the most rugged of adventures, the body has been coated in an ultra-scratch-resistant coating while the main tube has been nitrogen purged and O-ring sealed for fog proof and waterproof capabilities. The Kahles K18i 1-8x24 3GR has been specifically engineered for long-range precision and delivers the highest level of performance achievable.

Sig P229 Elite Dark Tactical, Threaded Barrel - $650 Great gun, been in the safe and don't bring out of the case so putting it up for sale. The new P229® Elite Dark is the newest edition to the P229 Elite and features an ergonomic beavertail grip, front cocking serrations, front strap checkering, SIGLITE® Adjustable Combat Night Sights, custom aluminum grips (May differ from image shown) and the new Short Reset Trigger or SRT. SIG engineers designed the SRT to provide you the same great safety and smooth action of the SIG DA/SA with a comfortable reset that is 60% shorter for faster trigger return and surgical control during high speed shooting. Item Number: E29R-9-DSE Caliber: 9mm Action Type: DA/SA Trigger Pull DA: 10.0 lbs Trigger Pull SA: 4.4 lbs Overall Length: 7.6 in Overall Height: 5.4 in Overall Width: 1.5 in Barrel Length: 3.9 in Sight Radius: 5.7 in Weight w/Mag: 32.0 oz Mag Capacity: 13 Rounds Sights: Adjustable Combat Night Sights Grips: Aluminum Grips Frame Finish: Black Hard Anodize Slide Finish: Nitron® Accessory Rail: Yes Features: Accessory Rail SRT™ – Short Reset Trigger

I recently got a Glock 19 Gen 4 that someone cut down to a Glock 26 size grip and I searching for another frame for it. Please let me know if you have one available or have seen on thanks!

Removed

ad closed.

This is an excellent condition Mark IV with maybe a couple hundred rounds through it. Just been sitting in the safe for a long time. Still got the box. Bull barrel with rail. $465 cash FTF in the Mt. Juliet city limits. Tennessee residents only.

Continuing my gear purge and listing a mint-condition PWS upper. Purchased this a couple of years ago, and still haven't put any rounds through it so I'm letting it go. This is a long-stroke piston-operated system with an adjustable gas block. Not looking for any trades on this one. Asking price is $1200. No trade offers, please (unless you have a 14.5" version) Located in West Nashville, but able to meet up pretty much anywhere in the area. Let me know if you have any questions, and thanks for looking!