Search the Community

Fully equipped, 2021 Nucanoe F12. 360⁰ Fusion seat in perfect condition with extra cup/tackle holders. Fully tracked with YakAttack rails in every available surface, extra T bolts & nuts included. 2 YakAttack rod holders & GPS base Foot rests Anchor cleats & YakAttack soft anchor pulley system XL Dashboard with positions for extra rod holders, phone, speakers etc.... Lowrance Hook2 Fish finder/GPS plotter with Scotty transducer arm. Runs for 28 hours on a 7 amp Lithium battery (not included, sorry!) Bending Branches 280cm Classic Angler carbon paddle. Fiberglass, soft ground/bank anchor pole, plus folding grapple anchor Clip on nav lights (RGW) 1 emergency Co2 Auto inflate PFD size XL. Worn, but never deployed Waterproof bag insert in front storage hatch. Full set of scupper plugs. 1l I'll even throw in the net & tackle crate The boat comes on the galvanized trailer. I replaced both wheel bearings & tires last spring before a trip to Texas & they have years of life left. I also fully rewired the trailer & installed new lights (needs a 1⅞" ball hitch) Everything is in near new, perfect condition, other than a little normal gravel rash on the exterior of the hull. I try hard to take care of my stuff! If I find anything else related that I've forgotten to mention, it'll be included in the sale. The only trade I'd be interested in, would be in part for a Softail Harley (No Dynas thanks!)

For Sale - Sig Sauer Romeo 3 Max - 6 MOA red dot sight. Brand new in the box. Never been used. Didn't fit the gun I bought it for. $550 FTF (Nashville area) or $560 shipped. Cash or USPS money order.

Both are the same blank made from Sleipner steel and is known for it's durability and reliability. It is celibrated for is sxception sharpness, edge retention and resistance to the elements. It has high chromium and it has better corrosion resistance than regular carbon steels. They are 4.4mm thick and have a Rockwell hardness of 59-60. OAL of 9 1/2" with a blade of 4 1/2". They come with leather over kydex sheath shown and are $125 each shipped. 1, Sold to LeeTheToolGuy Padauk handle with G10 accents and liners. Mossaic pins 2. Sold to mike_f Desert ironwood handle with G10 accents and liners. Brass pins.

DP12 Shotgun by Standard new in the box. $1200.00 obo

$100 - two - Ruger factory sealed, Blued steel, 30-round, .223 Rem. caliber magazine for Mini-14. FTF or $12 shipping Cleaning out the safe, no trades needed please. location: Smyrna, TN come get it them anytime after 5pm, give me a PM for directions Sorry, I'm not driving to meet anywhere except for the Smyrna Police station. Too many instances so I'm keeping it safe and legit for all parties. Thanks,

Come to the decision to sell off my 40 S&W pistols. The Glock 27 is my favorite of them. Small enough to conceal easily. Naturally subsonic. Will come with everything a new one does. All controls are extended. New night sites within the last 6 months. Both factory mags have +1 extensions so you can get a grip. Will include 1-13 round mag and 1-15 round mag. All Glock branded mags. various branded ammo, 1000 rounds of FMJ and a hundred or so Critical Defense rounds. ALL is boxed NOT loose rounds. Cash price is a firm 700.00 Trades considered. 9mm Glocks, AR 15/10 platform pistols and rifles, P320 9mm & parts, .223/5.56,9mm, 7.62x51/.308 ammo tops trade interest but open to offers.

Selling my very lightly used Benelli R1 .30-06 with a Leupold VX-II 3-9x50mm

Loose pack for bulk storage in an ammo can with fresh seals. $625.

Realized yellow is just not doing it for me. Practically new Doxa Divingstar Sub 200 on bracelet, 3 weeks old. Has the balance of the warranty left. Running at +1spd $875 in Nashville area.

Browning Hi Power 9mm with original box. $1200 shipped to your FFL. FTF would require a local FFL transfer.

Up for sale is my Browning Buckmark Buck Lite with added tactical solutions rear sight optic rail, original rear sight, Burris tactical first strike optic, and original box. Price is $650 obo. Must pickup in Lebanon, TN or I can ship to your FFL for $30 extra. Must have valid TN Concealed Carry or transfer through FFL. Thanks!

This is the new limited edition color combo m&p metal SPEC with the threaded compensator, 4 mags, karambit knife and suitcase. Under 100 rnds fired. Comes with holosun 407c green x2. Located in Mt Julet. 1200 with optic for 1000 without the optic.

Went back to Glock and unfortunately never ended up having time to shoot competition. Round count is 600 exactly. Comes with everything as new, 4 mags, optics plates, box, manual, OEM trigger etc Also included: T-Rex Arms Ragnarok Kydex Holster with Safariland QLS Fork system x2 (Comes with gun only and 1 that’s set up for a TLR7 light). Will work with any M&P platform. Also comes with 2 T-Rex Arms Ragnarok Kydex mag carriers with tek-loks. Overwatch Precision TAC Trigger System (phenomenal trigger) $1050 cash FTF in Spring Hill/Franklin No Trades

..

I have a S&W 1911 Performance Center, scandium framed in .45 acp. Comes with the box, two factory 8 round mags, and a 7 round flush fit Colt mag. In. Looking to trade it on a Springfield Prodigy 1911 DS, 4.25 preferably with a red dot of some sort. I also have around 400 rounds of .45 acp, mostly ball with some hollow point, that I would like to trade round for round for 9mm of same type. Meet up around Oak Ridge, West Knox, Lenoir city.

For sale only. No trades. A pair of Remington 870s. These were police trade-ins that I bought back in January to stuff in closets or the truck. But then later that day I had to resign from my job and I haven't been making as much money as I was last year, so my poor timing means these guys should find new homes. I haven't put any rounds through them. They're police trade-ins so they have rack wear but they don't make the Remmy 870s like this anymore. Actions are solid and there are no defects, just cosmetic flaws. 1) Remington 870 Wingmaster with wooden furniture. 2) Remington 870 Police Magnum with synthetic furniture and magazine tube extension. $460 a piece or both for $800. I'll include some defensive shells if you want them. Must be a legal adult resident of TN with a valid photo ID and in good standing. TN HCP preferred. Located in Spring Hill. I don't travel much. Call/Text 615-300-3074 or message me through here. Pics are too large to upload (or so this website is telling me). I'm sorry. Shoot me a text and I'll send them to you.

Someone has to have a spare TGO sticker or two laying around. I've had one on my Jeep since about 2010. Need to find another one as I'm out and the one on the Jeep was coming apart.

This is a complete slide assembly from a Ruger P89 in 9mm. It comes with the stainless steel slide , the barrel , recoil spring , and guide rod. It is all stainless steel and in like new shape. This is a "de-cock only" slide which allows you to de-cock the gun and let the hammer down and the de-cock lever will spring back up to be ready to shoot again. I'm getting rid of parts that I don't use or need. $75 . I am in Clarksville . I can ship it for $10 more. I don't use electronic money so I ask for a US Postal Money Order. Thanks for looking.

I have 1000 rounds for sale, purchased late fall of last year. $600 for all Located in Crossville, TN

I have a Stoeger M3000 Freedom for sale. Takes 3 inch shells It has an 18.5 barrel 7 round capacity from factory with a MOA Precision 2 shot end cap for a total of 9 rounds. Ghost ring sights Magpul stock with MOA Precision stock adapter. Located in Oak Ridge Not looking for trades at this time. Asking $650 obo. 425-243-4568

Ruger American Hunter with Heavy Barrel and MDT LSS Chassis. Has Magpul Stock Harris Bipod, 1 10-round MDT Boyds Laminate Wood AR Grip. Located in Oak Ridge. Asking $750 obo Would be interested in a good quality 357 or 44 (no Taurus or Charter Arms) or a nice compact 20 gauge. 425-243-4568 TEXT ONLY

I have 3 in their original package. Asking $35 each. Sold three to a fellow member but found a couple of more. Located in Oak Ridge

Custom fitted, black walnut grips. Maybe shot 200 rounds. Comes with everything from the factory plus a good quality, leather, cowboy style holster. I bought it for bear protection when I bowhunted out west, but I no longer have a use for it. I'll throw in all the 300gr, hardcast handloads I have plus whatever spare brass I can scrounge up. I also have an Alaris Tactical chest holster I'd part with for an extra $50 to the buyer. $700 firm (I don't do haggling. I list for the lowest I'll accept.) No trades. Can meet anywhere between Winchester & Murfreesboro.

This one hurts to post, but if I'm honest with myself, I've sat & stared at it for 2 years now. It's just too damn pretty for me to hunt with & I know I'm going to spend more time worrying about it getting scratched than I actually would hunting. I built this up from parts. The action is a Sears model 52, which is the Sears specific brand Winchester Model 70. I had the entire action blueprinted & rebarreled to 6.5x55 Swede by E.R. Shaw. The barrel is 21", 5R rifled with a 1:8 twist. The profile was turned to match the factory M70 barrel which is basically a medium/light Sporter. The barreled action was then mirror polished & sent to a specialist refinisher in Wyoming for bluing. Along with that, the hinged bottom metal, bolt shroud, trigger, grip cap, scope mounts, sling swivels & all screws & fasteners were sent for color case hardening. While all the metal was away for finishing, I found an unfinished, Exhibition grade walnut stock & set about hand fitting & finishing. I hand sanded everything to 800 grit & applied 24 coats of Alkanet oil, wet sanding the first 12. Once the color I wanted was achieved I applied 32 very fine coats of polymerized Tung oil (over a period of about 4 months) The stock was then sent to Ahlmans for hand cut checkering in a 22tpi Winchester point pattern. Once finished, the checkering was then very lightly oiled. Once it was all back here & together, I added a Leupold FX-3 6x42 scope. I've taken it to range 1 time to zero & work out a load & that's literally it. I don't think I've fired 40 shots since I finished it. The whole project was a labor of love, because I wanted an Heirloom Quality gun, only to find out that I'm far better served with working guns. I don't know how many hours went into the build, but I'm pretty sure I clocked over 100 just in the stock. Since then, it's literally sat in the cabinet slathered in anti-rust. I've occasionally taken it out to look at & fondle. It's a crying shame to just have it sitting & it needs to go to someone who'll actually use & appreciate it for what it is, rather than just being a decoration. I'm not gonna lie, I'm pricing this at slightly less than I have in it, but not much & the price is NOT negotiable. I paid nearly half the cost just for the stock alone. $2000 will buy it & if it doesn't sell for that, it can stay in the cabinet. I'm only selling her now to fund a used Harley purchase (unless someone wants to part trade me for a ratty big twin.....) Link to photo album....... https://imgur.com/gallery/LrNFN1l

Less than 100 rounds. Has extended releases and night sites. Great gun just never gets any use. Will meet in Lebanon/Mt Juliet area. Mags pictured are included. No case. $500 firm. Need to see ID at sale. Trades considered: 9mm compacts or smaller