Search the Community
Showing results for tags 'for-trade'.
-
I am wanting to trade my Ruger American in 30-06 with a vortex( I believe a crossfire) scope on it. I am looking for a handgun to keep by the bedside, I would really like some type of Glock but I'm not terribly picky. -
I had this rifle built for Varmint hunting with stalking in mind. I just never found the time to get into it. Rifle as seen in photos weighs 8.2 lbs. I zeroed it with Hornady 75 grain ELD's and haven't used it since. Action- Remington 700 that has been accurized (lugs lapped, face trued, threads chased) surface ground recoil lug, Bolt knob threaded. Barrel- Bartlein Stainless Steel cut to 24 inches and threaded 1/2x28, Barrel taper is a 3B (Light Bull Sporter) 5r rifling with a 1:7 twist (to shoot heavier projectiles). Trigger- Timney straight, adjustable. Stock- Greyboe Phoenix, takes AICS magazines or Magpul AICS. Barreled action is in OD Green Cerakote.
-
long shot here but worth asking, I have 1000 CCI No# 11 percussion caps I would like to trade for 1000 No# 10 percussion caps for my pistol, meet greater Nashville area, also willing to buy No# 10 caps, thank you for your time just message me here also have Federal 209A and CCI magnum 209 primers to trade -
Colt LE6920 upper, with DD BCG and charging handle. Lower is M4A1 property marked PSA. Colt carry handle rear sight. Vltor A5 buffer system. M4 or car stock. Have options for Colt quad rail, sig romeo 5 red dot and Troy rear sight. Base gun as pictured $800 Add $150 for Romeo5 and Troy sight. Add $50 for Colt quadrail. Would consider trades for: 20” colt/FN flat top AR or Upper peq lasers eotechs
-
Savage 110 high country in 300wsm only 7 shots through the gun talley rail and rings 213 round of 300wsm factory extras included Muzzle device had a couple marks from installing $900 or trade for sub gun, something in 6.5 grendel. Open to trade plus cash for something good. Located in antioch TN
-
Steiner DBAL D2 green via, with VWS diffuser mounted for 1 range trip and took it off,one light scratch on side. $1000
-
Like new, unmarked, in box. Model number 200261 2-7x32 Ballistic Plex reticle. I mounted it on my M1a, zeroed it & immediately sold the bare rifle. $350 plus shipping, or $385 still mounted in the Leupold rifleman extra low rings.
-
Used for 1000y and rimfire matches. Works excellent for rimfire with its close parallax adjustment. Japanese glass. Japanese made. Excellent condition. Lifetime warranty. Come with the box. $400 I also have a nightforce mount that I could do a package deal on. Chattanooga area.
-
SOLD.
-
I have 1000 Wolf small pistol primers to trade for either large pistol or large rifle magnum primers. I'm not particular about brand. I'm in the Crossville area and don't want to drive far to meet, but I will be going to Murfreesboro for a late morning appointment on Tuesday the 16th. I drive through Sparta and Smithville to go there.
-
Well, what do you know? I found these in the back of the cabinet where I store some of my reloading components. 1000 Wolf Small Rifle primers. ETA Magnum Small rifle primers. 6/19/24 I don't even recall purchasing them but apparently I did. Stored indoors, climate controlled environment. Looking for a LOCAL trade in West Knoxville. I would happily trade the 1000 Wolf Rifle Primers for 800 small pistol primers, any flavor or brand. Not for sale. No shipping. Just PM me with any questions. Trade options, like pistol powder, considered. Thanks for looking. -
Looking to trade off bullets I have for calibers I no longer own for something I can use. 7mm: Probably 20 ELD Match 162 grain and 100 Hornady Match 162 grain, bulk packaged by Midway. And I’ve got 100 new Starline 7mm-08 brass. .44 caliber: Acme, Lightening, Serria, and cast performance. All boxes are 90% full. And I’ll give you the loaded ammo I have to breaK down and use the components. Mostly looking to trade for .308 bullets, H110 powder, Varget, Lil’ Gun. That sort of stuff. Trades can be in your favor as these are calibers I have no use for.
-
for-sale CZ-75D PCR 9mm with extras $600 *SPF*
Three Bean Dad posted a topic in Firearms Classifieds
The gun was made in 2019 according to the stamp on the slide. It has less than a thousand rounds through it. I replaced the stock grips with g10 grips. I replaced the stock sights with Dawson Precision fiber sights. Otherwise the gun is stock. It comes with 4 magazines. The two with the gun were stamped ,40 cal and I bought two additional mecgar mags. I also got a kydex iwb holster for it. I would consider trades for pistols in .40 S&W. I am firm on the price and will want to see a TN DL or CC permit before purchase. I can meet in the Knoxville area. PM me if you are interested or have questions.
-
I have a Romanian Draco with CNC warrior brace in 7.62x39 for trade. This firearm is in new and unfired condition. This comes with box and 1 US Palm magazine. I am looking to trade for a 9mm carbine. Lenoir City/Maryville area meet preferably. Thanks for looking.
-
Photos and full specs will be uploaded tomorrow but I have a GA Precision Hospitaller for sale/trade. Trade would need to be for a vehicle as I am not interested in acquiring more guns at the moment. The rifle is in great condition with less than 1000 rounds fired through it. Comes with bipod and case. I have a Bushnell Elite XRS Tactical 4.5-30x50 for it which I would throw in at a higher price. Looking for 3,250 for just the rifle. 4,100 with the scope as well.
-
SOLD!!!!!! Let's do this again. Here's a USC 45acp 16"Bbl converted to a UMP 45acp 16"Bbl. $1500 CASH/OBO FTF with everything pictured, H&K Soft Case, New Holosun 510c two UMP Mags. one 15rnds, one 20rnd, XS Front Tritium Sight, Sling, and UMP Manual. I live in the Whitehouse area and can meet locally around Goodlettsville Hendersonville Gallatin and Nashville area, I can drive some to meet and make the deal. I had this listed earlier and as stated I did the conversation. It has all the compliance parts, the two UMP 45acp Mags. have the correct compliance parts installed, the UMP Lower has the correct parts installed, Stock Block is in compliance, Stock is in compliance. I did all the work, including cutting the vents, and I want to make clear that I did them by hand and they aren't perfect. I cut the USC UPPER to accept the UMP Double Stack Mags. Everything functions properly I test fired 10-15rnds to test. Feel free to PM me Trade Offers/TRADE VALUE $1900. Would consider 1911's in 9mm/45acp Other H&K's Rifles in 308cal ect.... just let me know by PM what you have, a little CASH Difference either way. -
Excellent Rifle that has been shot very little, if at all. Added the Archangel stock, changed the flash hider, added springfield scope mount, vortex scope, 1 20 rnd mag, quick disconnect sling, factory Rifle bag and factory stock included. $1900 cash without Scope and mount.
-
Nice condition, box and papers. 1 magazine, clean .45 acp. $850
-
I have a Smith and Wesson 15-22 non-threaded barrel model. Would like to trade for a threaded barrel model. May possibly be interested in purchasing a threaded barrel model of someone isn't interested in trading. I'm located in Lebanon.
-
I have a 2015 Harley Sportster Seventy-Two for sale (1200cc). Low mileage (1,700 Miles) and always covered. It runs and has no issues. I have invested in Vance & Hines Slip-Ons, HD Sissy Bar, longer leather seat, and an updated circular instead of ham shaped air cleaner cover. I probably have an additional $1,300 in it from what was stock. There is a scratch/dent on bottom on one of the exhaust covers from rocks kicking up on it while riding in a gravel lot a few years ago. (See Image for close up). If that's bothersome you can purchase new covers for less than $200 and the bike will look brand new. $6,500. It' already paid off (I am the only person who has ever owned this bike) and I have Title In Hand. I love guns, so I'm willing to trade for things of equal value as well. Been looking for some KAC SR-15s and night vision binos. That's what I plan on using the money for anyways so if anyone has any solid trades I'm open to those as well. Message me for any additional questions.
- 6 replies
-
- 2
-
-
- trading post
- for-sale
- (and 1 more)
-
LNIB condition. I doubt there are more than a couple hundred rounds through it. I’m looking to trade for a .22 pistol. Preferably a threaded Ruger MK something. Must have box, etc. I value the 92X at $650. I’m north of Nashville.
-
Psa lower and upper, carbine gas, rifle length buffer , hera hrs light stock, full rail fore, MI rear sight. Smooth shooter.
-
For Sale /Trade. Wilson Combat 5.56 11.3" Complete Upper ( NO BCG ) 100 rnds through it. Will sell for $ 600 obo Also Interested in a Pistol length ( 8" - 10.5" ) .300 Blackout Upper in trade CAN MEET AT ALABAMA/TENNESSEE STATE LINE -
I got an Promag extended mag I’d like to trade for a factory 6 round.I got it extra with the pistol. Not actual mag , but it’s what it will look like. -
Polymer 80 Glock 19 clone with Trybe slide, SMG barrel, Zev compensator and trigger. I love everything about this pistol, and it runs amazing. I’m just a lefty, and not being able to reverse the mag release or have ambi slide catch is just annoying. And for something that I want to carry, I want it to be easy to manipulate. $700 Only interested in trading for gen 5 Glock 19, 45 or 19x.
