Search the Community

Selling this unfired PSA (Palmetto State Armory) 16 in barrel AR-15. Multi-cal (5.56 or .223). Carry handle is mil-spec PSA. It mounts to the rail and can be removed to install a different optic. Furniture color is FDE (flat dark earth). $560 FIRM. Not interested in any trades. Local pick up in Clarksville only. No shipping. Buyer must be at least 18 years of age with valid Tennessee or military ID. Buyer must sign a Bill of Sale. If the listing is still active, the rifle is still available. Manufacturer's description: Upper 16" Barrel Length 5.56 NATO Chamber 1 in 7" twist 4150V Chrome Moly Steel Barrel, Nitride Carbine-length Gas System M16 Full Auto Bolt Carrier C158 MPI/HPT Bolt Charging Handle FEATURES Barrel: 4150V Chrom Moly steel. Chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a carbine-length gas system. This M4 profile barrel is finished off with a standard handguard in Flat Dark Earth, F-Marked gas sight base, and A2 flash hider. Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made for us right here in the USA by a mil-spec manufacturer. Bolt: Full-auto profile bolt carrier group. Milspec Carpenter No. 158® steel bolt, Shot Peened, High pressure tested, Mag particle inspected, Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec. 8620 steel M-16 profile carrier is chrome lined and phosphate coated. Lower: Manufacturer: Palmetto State Armory Product Line: PA-15 Platform: AR-15 Includes: Stealth Lower Furniture: Classic Finish: Flat Dark Earth FEATURES Machined from Aluminum Forgings 7075-T6 Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2 Milspec diameter Receiver Extension M4 Stock, FDE Staked M4 Lock Nut Standard Carbine Buffer Un-notched Hammer compatible with 9mm use

Like new in box with manual Six shot. In Loudon or surrounding area. 165:00

STOP IT!!! The word you're looking for is 'Sale' An item you want to sell, is 'For Sale' Do better.

Up for sale is a bushnell AR/22 rimfire scope 2-7x MOA. Great condition mounted once on a 10/22 for a short period then sat in its box. Includes box, papers, and bikini scope caps. Asking for $100 cash. Located in Chattanooga.

Kalashnikov KS-12T. Comes with the original box and everything that came in it. 10 rounds through it. 750 OBO.

S&W 15-3 .38 special and S&W 19-5 .357 mag. Each have 4 inch barrels. Each is $900 or $1700 for both.

SIG SNAKEBITE SE .308/7.62 NATO for sale. 2 stage trigger, ambi mag release and safety. 1 twenty round Pmag . FDE upper and lower receiver. $1600. located in Mount Juliet. Only trades considered would be for WWI,WWII German and American arms.

Edit: sold pending meet up Looking to sell my CZ P10c. Had the gun milled out for an RMR by jagerwerks and had suppressor height sights from Dawson precision installed (black out back, fiber optic front. Includes factory case and paperwork, all grip back straps, and 3 additional factory magazines all 15 rounds. Pictures that include RMR are for demonstration only the sale does not include the RDS. Approx 1k rounds through the gun. Looking for $425 cash. Prefer local pick up in Chattanooga if possible. Must be able to present valid TN DL or HCP at time of sale.

Hello! I’m looking to sell my Remington 7600 30-06. It was manufactured in 2007. I just don’t hunt anymore and have no further use for it. This is cross posted. My asking price is $1000 or best offer, cash only. Open to trades, might consider a Glock plus cash. I am located in Cleveland, TN. I can meet you in Cleveland, Athens, Lenoir City, Oak Ridge, Knoxville, or Chattanooga.

A new in box Vortex Defender CCW 3 MOA dot. Took it out of the box and powered it on to verify it worked and put it back. All accessories from Vortex included. I can meet in West Knoxville/Lenoir City. $185

(4) 21 round Magpul Glock 9mm magazines, new and (2) 17 round Magpul Glock 9mm magazines, like new. Little use if any. $55 for all six magazines. Firm, no trades.

Let me know if you got some to sell

Looking for a Glock 43X in like new condition around Knoxville. Thanks

For sale -- S&W Model 41 .22 semiautomatic, excellent condition. This gun is a pre-1969 model (serial no. 77xxx) with cocking indicator and two factory magazines. Comes with original box. All yours for $1100, if you're a TN resident legally able to purchase handguns. I'm in Chattanooga but will travel a little bit for a deal. Not really looking for trades right now except that I do need a 2" Model 12 or 2" Model 15. Thanks for looking, Whisper

Anybody happen to have this historic almost extinct round? I bought a tri-barrel with 16 gauges over a single rifle and that's the caliber. Would rather not buy an entire box as I will probably never shoot through all of it, but im open.

This one hurts to post, but if I'm honest with myself, I've sat & stared at it for 2 years now. It's just too damn pretty for me to hunt with & I know I'm going to spend more time worrying about it getting scratched than I actually would hunting. I built this up from parts. The action is a Sears model 52, which is the Sears specific brand Winchester Model 70. I had the entire action blueprinted & rebarreled to 6.5x55 Swede by E.R. Shaw. The barrel is 21", 5R rifled with a 1:8 twist. The profile was turned to match the factory M70 barrel which is basically a medium/light Sporter. The barreled action was then mirror polished & sent to a specialist refinisher in Wyoming for bluing. Along with that, the hinged bottom metal, bolt shroud, trigger, grip cap, scope mounts, sling swivels & all screws & fasteners were sent for color case hardening. While all the metal was away for finishing, I found an unfinished, Exhibition grade walnut stock & set about hand fitting & finishing. I hand sanded everything to 800 grit & applied 24 coats of Alkanet oil, wet sanding the first 12. Once the color I wanted was achieved I applied 32 very fine coats of polymerized Tung oil (over a period of about 4 months) The stock was then sent to Ahlmans for hand cut checkering in a 22tpi Winchester point pattern. Once finished, the checkering was then very lightly oiled. Once it was all back here & together, I added a Leupold FX-3 6x42 scope. I've taken it to range 1 time to zero & work out a load & that's literally it. I don't think I've fired 40 shots since I finished it. The whole project was a labor of love, because I wanted an Heirloom Quality gun, only to find out that I'm far better served with working guns. I don't know how many hours went into the build, but I'm pretty sure I clocked over 100 just in the stock. Since then, it's literally sat in the cabinet slathered in anti-rust. I've occasionally taken it out to look at & fondle. It's a crying shame to just have it sitting & it needs to go to someone who'll actually use & appreciate it for what it is, rather than just being a decoration. I'm not gonna lie, I'm pricing this at slightly less than I have in it, but not much & the price is NOT negotiable. I paid nearly half the cost just for the stock alone. $2000 will buy it & if it doesn't sell for that, it can stay in the cabinet. I'm only selling her now to fund a used Harley purchase (unless someone wants to part trade me for a ratty big twin.....) Link to photo album....... https://imgur.com/gallery/LrNFN1l

Offering up another one I took on trade but will probably never use. Stainless Walther PPK chambered in .380 cap. Comes with 3 mags and factory box. $750 obo.

New unfired Saiga 12 iz109 model. This was one of the last models imported before the ban in 2014. Still in the grease as they say.AK platform shotgun for those that don't know. 19" threaded barrel, includes 1 magazine. $900 (high capacity drum available for extra $$$) Norinco M97 shotgun. This is a stunning copy of the famous Winchester model 97 12 gauge. Hammered action complete with "slam fire" capability. Some consider this the "riot" version as they also remade the famous "trench" version. Still in the grease. $900 No trades I'm in east tn

I have a nephew with a birthday right around the corner and I am looking for a decent .22lr plinking rifle to give him for his first gun. Nothing fancy and nothing "tactical"... something between $200 - $300 with iron sights would be ideal. A left hand bolt would be awesome!

Edit: sold pending meet up Looking to sell my Sig p365. Pistol had approx 1500 rounds through it and has some holster wear from carry. Includes factory case and paperwork, pistol, and the two factory 10rd magazines (flush fit and extended grip). Asking $375 cash, prefer local pickup to chattanooga, must be able to present valid TN DL or HCP at time of sale.

Excellent condition optic ready Hellcat. original 11 and 13 round mags. Adding extra 11 round mag of sold this weekend, thru 4/28. total of 3 mags. Comes w/ original box, paperwork, range case, and flat plate for 11 round mag. Including a Fusion IWB hybrid holster w/ Ulticlip. This hybrid holster has a hard plastic inner shell to keep its shape and is lined with sueded leather to prevent finish wear. It has the outer layer like a sticky holster but isn't one $450. Not lookin for trades Sold pending meet. Chattanooga area

Cash. FTF. Knoxville. ADCOM 5.56. $500/1K. Various Russian 308. $700/1k.

Originally was a complete M&P-15 LE contract rifle w/ Magpul furniture (stock, grip, handguard, & foregrip). 16”bbl. asking $650 obo. Repurposed the original lower for a different build and swapped the original LPK & furniture to this lower. Have not personally fired this rifle and based on the brass deflector and lack of carbon buildup on the flash hider, it appears to have been mostly just moved between lockers, cars, etc. but never shot.

I want to buy a spare 19.3 slide to send off to be milled (or buy a pre-milled…). Send me what you have!

Ruger New Model Blackhawk "Buckeye" Edition For those unfamiliar this was a limited run issued by Ruger for Buckeye Sports in what I believe to be 1988-1989. As usual with limited runs they quoted only 500 of this model exists but I've never done the leg work to verify. I just know this one is new in the box and have been in my Ruger collection for a long time. Time to see if someone else wants to add it to theirs. Chambered for 38-40 / 10mm. The 10mm cylinder has never been spun and only left the wrap long enough for a pic. 6.5" barrel. It has the Buckeye blossom etched into the top strap to indicate the limited model and has a SN special to this run. Box isn't mint but really good for it's age. Only trade interest would be a collectible on my short list and those are pretty specific anymore. $1500 I'm in east tn but travel occasionally and I'm also not against shipping it if that's whats needed.