Search the Community

Glock 19 Gen 4 with the frame stippled and cut to a 26 size comes with 1 15 round mag, 2 12s and 1 10rd. Blackpoint tactical mini wing holster and a bravo concealment owb. the slide is in GREAT condition and very low round. Wanting to sell or trade for a different 9mm. $400 I’m in Columbia

Clearing out the safe and reorganizing the collection. Getting rid of the ones I most likely won't ever shoot. All three of these are unfired in the original box. Pickup is in Bartlett TN, I will need a copy of drivers license, preferably a permit flash and for you to sign a bill of sale. Pictures to follow Wilson Combat Protector AR-15 with Stainless Barrel. 1800.00 now 1600 Geissele Automatics Duty Pistol 10.3", 556. 1800.00 now 1600 Smith & Wesson M & P 15-22 Pistol. 500.00 Will consider trades, but would rather sell at the moment to get cash, current interests are mainly Wilson Combat 2011, 1911, etc

I'm clearing out some of the extras in my collection, I am getting older and have two daughters who have zero interest in firearms. This gun was actually from my grandfathers general store in Dyersburg TN, has a price written of 39.50 on the box. If you are looking at this , you probably already know these are pretty collectible for some reason, I believe they were actually made by Astra...This has literally sat in the safe since I got it years ago, I will never fire it and don't really have anyone to leave it to, so it's for sale. I think you would have to look super hard to find another unfired like this one. I love the looks of it as to me it appears like a miniature 1911 Anyway, pickup in Bartlett TN, bill of sale required

A Pair of Ruger Single Six 5 1/2" barrel 22 pistols. The are three screw model, but most importantly they are flat loading gate models which are harder to source. These were purchased by my father in the 50's. I have shot them many times, the barrels still look great. I'm just starting to clear out stuff I don't use or need, Im not getting any younger and after losing my wife of 45 years about a month ago, I realized that some things are more important in life than just stuff collecting for the sake of stuff collecting...I have two daughters and neither are interested in all in firearms. Im slowly getting rid of my collectibles so it will be easier for my girls once I'm gone. They would prefer the money over the collectibles. The serials on these are not sequential, but they were purchased at the same time. 36xxx and 38xxx, I believe he was stationed in California when he purchased them. Very good condition considering age. I can only upload a few pics because of size, but can send more if you need, just pm me with an email Pickup in Bartlett TN, bill of sale required Give these guys a good home somebody, they aren't going to get any cheaper for sure

Absolutely mint Shot Once at the range. Mint with two mags that have TT Base Plates. case and all paperwork. $1799 new and hard to come by $1200

*Sale pending* Have this factory Ammo Inc 308 WIN 150gr ammo, 180 rounds. Asking $110 for all of it. Not interested in trades. Thanks.

Looking around for a Stainless Ruger Bearcat Shopkeeper. Let me know if you have one or have seen one local for sale. Thanks

Looking for a Sig P365 Grip module. Not picky about color. Sig has them new for $45. Thought I’d take a shot here first. Considering carrying this pocket carry. The Xl module I currently have is just a tad too big. Thanks!

Browning BBR 300 win mag with Karl Kahles 3-12x56 scope. Great overall condition. $1300 .. reduced to $1150 maryville area meet

Boy it’s been many many months since I posted anything here, seems like life is moving way faster than I’d like it to. I’m not keeping up very well. bbl length: 7.5 grips: factory rubber Anyway- I am prepared to part company with one, and maybe two BFRs I own. These were acquired new by me about 3 years back. Each were unboxed, inspected, cleaned, test fired with about 100 rounds each of hand cast 158g SWC (357 cases) over some Green Dot as a break in. I DONT shoot jacketed bullets but when I do, I hate myself. I have several BFRs and there are some that are heirlooms in the making for my kids. I love the platform……. But a hot rod needs some parts and this pair of revolvers are the most underutilized kids in the crib. These shot very well, perfectly. They were cleaned and the boxed. And there they have sat for 3 years. In the mean time, I have taken on several hot rod projects. I don’t own land, shooting on my work schedule is prohibitive at best. My shooting since moving here to TN has taken a nose dive to zero. I am rapidly losing an interest that spans over 50 years. But the hot rods can be worked on at all hours and I don’t need land. So…. Until I can move to the country and enjoy the outdoors I have surrounding me….. small block fords it is. Not a matched pair. My timing for acquisition was when the world had no BFRs. They came from separate vendors in other states. I wore a mask when I filled out my 4473s if that is any indicator as to the condition of the world. They are alike, but not by serial. I buy things in twos, I have but two sons and my stuff is theirs when I crap out. This precludes arguments over dads crap! They will have to buy their own 357 BFRs this time. I’ll post pics on Friday night. They will be good pics. Included with either or both, as it might go, will be factory replacement sights still in the shipping packages from MRI (front posts) which are shorter for shooting lower velocity cast. After that initial shoot, I called MRI and hounded them for front posts. I believe they have 3 heights. The tallest is what they come from factory with. My 44 is similar, very tall front, but I send 310s at Uber full monte and the sights are perfect. If the replacements are still too tall, maybe your as nuts as I and would shoot 148WCs at 780 fps, you can always call and they will send out free “next size” posts. Granted I shoot 357 maximum cast, 210gr at 1600 fps from a 10 inch barrel on other guns—-I am not timid nor is the BFR…—— but these guns were to not see ferocious magnums digested all the time. Their throats, timing, lockup, pull are all perfect for a stout heavy for caliber cast thumper but also for casual target loads. At 1000 fps the 158s land a bit below a 2 inch bull. Sights are regulated for a jacketed 125-158 gr thumper. I would have preferred 2 inch high at 25 yards and that makes 100 yard rabbit hits calculable. Of course box, docs, tags, scope mounts, etc as were shipped from MRI are all included with each. Buy one- $1100.00 Buy both- $2100.00 thats a very fair price considering the current market rate, acquisition cost reduction, SALES TAX!!!!, shipping, etc. TN HCP and a bill of sale will be required. I won’t drive a mile at that price but if you cover my fuel, I’ll go as far as two hours from Memphis. Now if you have a 4R70 or an AODE or E4OD with pattern for 302w/5.0, and it’s DEAD (junk/broken/destroyed), I need the case to section the bellhousing off for use on an engine run stand. Common cars you may have with parts to fill my needs: 1988-1996 ish v8 F150, Automatic v8 Mustangs from 88-94 ish, and the ever present, 96.5-2001 Explorer/Mountaineer 5.0 models. There are many others but those are the most likely candidates. As long as the bolt flange for block and starter are intact, it will be fine!! $50.00 reduction if you have such a junker case or trans for me. I can’t use any others, No C4, T5, Top Loader, etc. Lastly: I’ll trade both revolvers and add boot as needed for a Jerico DR4-4 (that’s the latest version 4) “clutch assisted” trans with a ford input shaft. Gear set doesn’t matter, I’ll have to re-gear regardless. And I’d be after a Long Shifter or Hurst V gate (inline shifters only). I know it’s a stretch but unless I ask, I’ll never know.

Looking to expand my collection into a new caliber. I've heard a lot about the .17hmr and I'd like to try it out. Not looking for anything in particular but definitely not a high-end or boutique gun. East Tennessee (east of Knoxville if possible) or willing to ship to me direct is preferred, not gonna drive 4 hours for a $200 gun. Cash, maybe trade for brand-new MAC or DeWalt tools, I'm a MAC Franchisee. So, who's got what?

WTS: Nightforce NXS 8-32x56 Scope - MOA Red Illuminated, MOA adjustments, NP-R2 reticle (edit, I thought was NP-R1 but see picture to confirm. picture is upside down) Used scope with no box & papers. No zero stop or high speed turrets. I'll include a standard 3 inch sunshade /glare shield. Pictured rings (Badger?) fit M70 bolt not included, but are available to buyer of scope for $50 at time of sale. Nightforce was used as a F-Class / match trainer on multiple M70 match rifles, and it has also taken several deer. Exterior: Small but still noticeable use marks. Some faint ring marks - most are 'shading' (not heavy dents / gouges) but still visible marks (see pictures) Glass: Really good used scope, glass is not perfect but no scratches or heavy swirls, nothing that distracts in use. Could use a good cleaning. I take glass pictures, but I'm no photographer and it's always better to see in person. I'm asking $1,200 cash face to face middle TN (Nolensville Franklin Cool Springs) or happy to meet you at Strategic Edge. If you have any questions or need additional pictures just let me know. Thanks, Tim

**Pics coming soon, but just wanted to get the ad up and running while I had some time Up for sale is a CZ Redhead Deluxe O/U shotgun in 12g with a 28" barrel. Purchased this used a few years ago and never really got into trap/skeet shooting. The shotgun is in great condition but shows some minor signs of use with dings on the stock here and there. Includes all chokes and the carrying case for when it's broken down for storage/transport. Asking $600 and willing to meet around the Nashville area. No trade offers, please.

For sale is a set of KAC irons. 99051front sight and lollipop rear. $225 for the pair Troy fixed sights. $75 Matech $30

For sale is a complete (minus stock) Rainier Arms ambidextrous lower. It currently does not have an ambi safety installed. Geissele g2 trigger. VLTOR A5 buffer setup. Assembled by Rainier Arms. $450 Rainier Arms upper with 18” stainless barrel and rifle length gas system. Rainier BCG. AAC muzzle device. No charging handle. No hand guard. $550. This was an accurate and very soft shooting rifle Face to face in middle TN will need to see DL and carry permit. Both of these have less than 200 rounds on them.

SOLD

VG+ Condition. 20" Barrel with adjustable rifle sights. Synthetic Stock and for end with Factory Limbsaver recoil pad. Made about 1995 and except for slight storage wear look close to new inside and out,spent most of its life in storage. Retail is close to $800 New on these and are not sold to general public and be sold only through Remington LE distributor. $499 Firm. No trades wanted.

Near Chattanooga. Looking for a 43X, P365, Shield Plus sorta 9mm. Prefer night sights.

Here's a 1975-1976 Smith&Wesson CLARK CUSTOM PPC Target Conversion 38spl. This one was built by Mr. Clark, features 6" Full Heavy Slab Bbl., BO-Mar Rib, Bobed Hammer, Hertts Bill Jordan Grips, very smooth Double Action(feels like your shooting in single action). This one was built in Keithville Louisiana. $1150 (or fair offer) Cash FTF First to post I'LLTAKEIT followed by a PM gets it (NO TRADES) I live the Whitehouse area but can meet in the Goodlettsville, Hendersonville, Gallatin, Nashville area, but I can drive a little to meet and complete the transaction. If you need some more pictures or questions please PM me and I'll try to answer them or email you any pictures of what you'd like to see. Thanks for looking.

Selling my Sig P228. has 2 mags and a Sig Sauer box. The sides have some holster wear, though the bore is good and the gun shoots great $750 in the Tri Cities area

I’ve got a Glock Knife I won about a year ago and it’s just collecting dust. Never used and is like new. $25 in South Nashville or North Franklin.

I have a box of usgi beretta m9 mags Will trade mags for 9mm ammunition 8 dollars each Portland Tn

This is a brand new with tags never worn Kuiu Axis vest. You can get all the specs here: https://www.kuiu.com/products/axis-vest-valo-camouflage?variant=40340497924254 These sell for $179. $99 face to face or $105 shipped.

Bought new, never used them. Two sets of racks for roof top racks on vehicles. Mounts to crossbars. $30 FTF Murfreesboro