Search the Community

I recently purchased the Milwaukee M12 Propex Expander. However, it came with 2 batteries and a charger --- and although everyone needs some spare batteries, I don't need anymore! Selling the two batteries and charger for $50.00 shipped. Home Depot shows $49.00 for the batteries, each. https://www.homedepot.com/p/Milwaukee-M12-12-Volt-Lithium-Ion-Compact-Battery-Pack-1-5Ah-48-11-2401/100672228

MagSpere MagGrip MagGel MagGel Standard Gels $120.00 for all - Compare to MSRP

I love the MagPul series Bump cases more than the Field cases. However, it's taken MagPul nearly two years (from the iPhone 8, longer if you count from the iPhone 7) to come out with the Bump case for these phones. Right now they are hard to find at a reasonable price, they are $49.95 currently on Amazon.com. I found a supplier and ordered four at decent pricing. One for me, one for a friend. That leaves two left that I'll be selling for $30.00 each, shipped. Let me know if you want one. MAG989-BLK

sold..................

I bought this trailer to store my Ranger and Zero-Turn while I was looking for new property and had my things in storage. I am now settled in to my new place and don't really have a need for it anymore. I don't want to leave it sit and degrade. - 16' V-Nose with 18" V so 17' 6"" inside length to V-nose. 7' wide. Electric Brakes. Tires are excellent. This hasn't been used much. - 3500lb axles, 2-5/16" ball. - 7' ceiling height- Allows for driving in a UTV (I had a Polaris Ranger XP1000 in it and it fit fine. I have doors but could open the passenger door and get in and out of the Trailer side door by myself. I pulled my zero turn in behind it and had about 2" to close the ramp. There are two set of E-Track on each wall at different heights. Good for tying things in. No damage of any sort and inside is very clean. No leaks or any issues at all. TGO Price is $SOLD. Will be listed higher on other sites. Title in hand. These were all the pics I had right now, but can take inside pics if someone really needs them.

All are $75 each and includes combo kydex/leather sheath shown and have thumb jimping on the spine. Buy 2 for $140...buy 3 for $215. #1 SOLD!! Walnut handles with Purpleheart and G10 accents and white liners. Mosaic pins and brass lanyard tube. #2 SOLD!!! Roasted curly maple handles with maple, tru-stone and black G10 accents and liners. Mosaic pins and brass lanyard tube. #3 Sold!! Bog Oak and red oak handles with red heart, black and white G10 accents and white liners. Mosaic pins and brass lanyard tube. #4 DymaLux Indigo Knife Scales ( resin treated layers for toughness and durability.) Grey, black and white G10 accents with grey liners. Mosaic pins and brass lanyard tube. #5 Sold!!! Arizona Sonoran Dessert Mesquite handles with Padauk, OD green and white accents with OD green liners. Mosaic pins and brass lanyard tube.

SOLD

Hopefully later today I will be taking quality photos of both of these pieces and posting to Ebay, but just thought I may save some trouble and find a buyer on TGO instead. If you are interested, message me as soon as possible as I will be posting these to Ebay as an auction soon. $125 - Apple Watch Series 3, Black, GPS 42mm Decent shape, screen/body shows some wear/scuffs. Fully functioning. If you are interested, I can take some quick cell phone photos and send to you.

Bought new, used twice. At almost 65, I've decided to hunt from the ground for the rest of my hunting days. I don't bounce like I use to. This Summit MSRP is around $250, google it. I'll take $100 firm. Murfreesboro area.

No longer available. Thanks.

I worked out that you are getting $3500 plus worth of equipment here. Please have that in mind when you look at this add. This kit is perfect for beginner and pro alike. It’s in mint condition and priced at $1900 for a quick sale. Extras include: Roland Drum Amp Pork Pie drum seat Gibraltar High Hat stand and pedal Iron Cobra kick drum pedal Roland VH-11 High Hat, As well as the standard Alesis HiHat Various Drum Sticks Drumstick caddy DW Drum rug

#1 5/32" 1084 carbon steel. Blade length- 4" OAL- 9" Hammer forged look with a light black oxide finish, Grandillo handles with SS pins, lanyard tube and handle accents. Thumb jimping on spine. Also has Tru-stone and G10 accents and G10 liners. Comes with combo kydex/leather sheath shown. $105 shipped. #2 SOLD!! 5/32" 1084 carbon steel. Blade length- 3 7/8" OAL- 8 1/2" Hammer forged look, spalted elm handles with brass pins, accents and lanyard hole. Tru-stone accents on handle as well. It has a nice crisp hamon , G10 accents and liners. Thumb jimping on spine. Comes with combo kydex/leather sheath shown. $115 shipped. #3 Sold!! Same blade size as #2 only in Damascus. Wenge handles with mosaic pins and brass lanyard tube. Tru-stone and G10 accents on handle as well as G10 liners. Comes with combo kydex/leather sheath shown. $130 shipped. Thanks for lookin'.

Does anyone want to make a serious offer before I place this Mac up for auction on Ebay, which will cost me 10% of the final sale price? I purchased this a while back, it's a great machine but a coworker has me itching to build a PC. I know, I know, there is a 90% chance that I'll spend money on a PC, use it a few months, and then sell it at a loss to purchase another Mac. It is what it is, but someone on here can just buy the PC from me at a discount at that point! $800.00 PayPal Shipped via USPS Priority I would also accept a Gen 5 Glock (9mm) + $400 Cash. I can and will take photos if needed, but it's basically been sitting on my desk ever since I purchased new. There is likely some minor wear if you were look closely, but it hasn't been dropped or anything like that. Specs: I've used this machine for Photoshop + Lightroom and it works great. Chances are, if you are unsure if this computer will be fast or good enough for you, it will be. It won't exactly play any modern games due to the integrated GPU. It is also still under warranty until December of 2019: Your product is covered for eligible hardware repairs and service under Apple’s Limited Warranty. Estimated Expiration Date: December 5, 2019 This product is $999.99 MSRP as shown at both of the following sites: https://www.apple.com/shop/buy-mac/mac-mini/3.6ghz-quad-core-processor-128gb# (make sure to change the storage to 256GB) https://www.bhphotovideo.com/c/product/1441907-REG/apple_z0w1_mrtr1_bh_mac_mini_late_2018.html/BI/1717/KBID/2301/

removed

Perception Kayak asking $180. Text for pics 615-556-9696.

I bought these as I was going to install a mesh WIFI network at home. I never did! Unopened, brand new/ They are $87 each on Amazon. Save yourself some $$'s. $120 for the pair.

$28,000 obo $2k below KBB 2014 FJ Cruiser Iceberg 92,950mi Off-Road Package- Crawl Control, Rear E-Locker, A-Trac Convenience Package Towing Package Upgrades: 295/70/17 Trail Grapplers Walker Evans 2.5 Coilovers Walker Evans 2.0 Piggy Back Rear Shocks with adjustable DSC Total Chaos Upper Control Arms All-Pro Rear Coils Icon Billet Rear Control Arms (new in box not installed) RCI Skids (Bash Plate and T-case) All-Pro Standard Duty Sliders RESZ Fab Front Bumper Warn M8000 winch Factor 55 Splicer Southeast Overland Synthetic Rope Uniden 520 CB with 4' firestick Springtail rear basket Ellis Precision Billet shifter knobs and Climate knobs General: FJ runs great, always maintained on schedule at Toyota dealership. Most miles are highway but has been off-road some. No damage, one wheel has some rock rash shown in the picture. Tires are in good shape, probably 35% tread left. Factory fender flares removed and I do not have them anymore if this is a deal-breaker I can have new ones installed. The driver's side mirror is broken (just shell, functions normally) but I have a brand new pair that goes with the FJ, can be installed at buyers request. Rear Door stay rod is on order and will be replaced soon. It still functions but the "hold open" latch is broken. Located in East Tennesse Read Less

sold..............

Sold Thanks

SOLD

EDIT forgot to add I have the title in hand and in my name. Hey everyone hope you're all well! I am looking to sell my truck, it is a red 2004 Nissan Frontier CrewCab 2WD with full length bed, don't let the body damage fool you this is a good truck the good: engine runs strong it is a 3.3L v6, transmission shifts good, timing belt was done at 151k miles its currently at about 205k or 206k miles I will get a picture later and post it EDIT as you can see it has 207096 miles work that has been done in the last two years: new rotors and brakes new valve cover gaskets new power steering return line new plenum gasket new plugs and wires as well as cap and rotor I also have a bunch of paperwork showing the different work that was done and can get print outs of the parts i replaced above has a new driver side headlight (installed) and also have a new passenger head light (not installed) now time for the bad: body damage (duh) needs an oil change (though i will probably get this done soon) needs front suspension and by that i mean new swaybar linkages and bushings, tie rod ends, new ball joints etc etc I was planning (and I may still do it just depends on how this goes) on buying the parts and doing the work myself as my uncle has all the tools I need to do it and all the parts with a couple of extras would be about $400 and that includes shipping driver side front turn signal does not work and that is either the bulb or the harness as it did get pinched a bit from getting hit in the front it may need tires soon, there is a good amount of tread left but the truck does not get driven much anymore due to the front suspension and so the tires have gone down a bit in air but I have fixed that as I had to move it recently but it still ran good and sounded good now for price, I know I will not get the amount I want but I am semi flexable on the price $2200 but again I am flexable but I can't go down to much, if I can get over $1000 for it then I am happy as I can put it towards a car I do want. I am willing to take trades as long as they are the same price or close to it Firearms I am looking for a pre 1997 jeep wrangler or an old vw bus or bug or rabbit convertible even if they don't run as long as they are not rust buckets I may take it, the worst I could say is no so hit me up for more pictures or wanting more info or trades. Take care!

$60 OBO - SALE OR TRADE I have four of these chairs -- red -- that are brand new. Typically $29.99 each, I'm asking $100 OBO for all four. Open to various trades. Brand: four seasons courtyard Description: Four seasons courtyard, marbella, red, steel folding chair, red sling fabric, chair measures 24.41"d x 23.23"w x 36.62"h, 300 lb capacity.

11 1/2" OAL beauty with a false edge and hollow grind. The blade is right at 6" long. it has over 500 layers to achieve it's look. It's about 3/16" thick at the spine. It has ebony, faux ivory handle with purple heart insert, black and grey G10 accents with black liners. Mosaic pins and brass lanyard tube. Comes with sheath shown...$160 shipped.

These are the same size/pattern as the sawmill blades but of course made from farrier rasps. I have to charge a bit more for them only because they are a lot more work that normal sawmill blades. They must be annealed before working on as they are so hard and there is sooo much more sanding involved. But fear not...they are not meant to break the bank...instead of $75 these will go for $85 shipped including sheath. 1st Handle is roasted curly maple with Wenge and brass accents with Green G10 liners and mosaic pins and brass lanyard tube. It has thumb jimping on the spine. 2nd Handle from birds eye maple, tru-stone and camelthorn with white G10 liners and mosaic pins and brass lanyard tube. It has thumb jimping on the spine.

AD CLOSED, thanks for looking. Never worn, Stafford, navy blue blazer, size 52 long, wool/polyester blend. Tags and labels still on blazer. New $160 plus tax - lost weight since purchase. $25.00, I'm in the Crossville/Tansi area but frequently travel to West Knoxville and also Cookeville. If you're nearby and think it may fit, I'd be glad to bring it along and let you slip it on.