Search the Community
Showing results for tags 'ad closed'.
-
5.45 AR Rifle parts kit - $200 An Adams Arms VooDoo barrel (16 inch, 1/8 twist, carbine-length gas system .750 dia, chrome lined, black coating), a 5.45 bolt (fits standard AR bolt carrier), and 10 magazines with 5.45 followers and 5.45 stamping. I only shot 10 rounds through the barrel back when I got it to test a build. I also have an Adams piston gas block and pins that I will include with it, in the event you might have an Adams Arms piston kit you want to add this to. $200. I can ship if you want to add for the shipping cost.
-
Ad closed
-
Clean T/C Hawken .50 muzzleloader. Nice bore. GONE Would trade for a T/C Patriot muzzleloader pistol (I know that's a long shot) FTF Murfreesboro
-
Im looking for a Smith and Wesson N frame in .45 ACP. Preferably a steel frame 22-4 Thunder Ranch edition. Im including a picture of exactly what Im looking for, this is one that was sold here about 6 months ago, but Im insure who bought it. If it was you and youd like to sell it please let me know.
-
SOLD For sale is a nice IBM M1 Carbine. Comes with 2 mags and approximately 600 rounds of ammo. 100 rounds are Magtech and approx 500 (I'm pretty sure this is as purchased but I can't be 100%) rounds Aguila in the ammo can. I won't sell the ammo separately unless the M1 sells to someone not interested in the ammo. $1500 in the Mt. Juliet area. Prefer a TN HCP holder for obvious reasons. If you don't the ammo, just let me know and we will figure something out.
-
The sheaths have been wet molded to that specific knife. Care much be taken when installing/removing the knife as to not cut/damage the leather. I've removed and installed the knives at least 15 times so I know it can be done. The sheath and knife come as package for $155 each. Additionally, knives should never be stored in leather sheaths for extended periods as leather holds moisture and will rust carbon steel knives and may even discolor/stain SS knives. Let's face it SS means "stain less" and not "stain proof". 4.2 MM thick Bohler SS with a Rockwell hardness of 59-60. Each knife is 8 3/4" long with a blade of 4". N690 steel is cobalt-enriched stainless steel manufactured by Bohler, an Austria steel company. This steel is high in carbon and chromium elements with the addition of cobalt for consistency. N690 steel alloy contains high amounts of chromium making it stainless steel. It also has fine grain composition that enables the blade steel to remain sharp for a long time even after exposure to prolonged tough applications. Bohler N690 steel’s ability to withstand stress is a favorite choice for knife makers. It is used to make outdoor knives including, tactical, camping, hunting, and bushcraft knives. 1. Sold to LeftySlade Antiqued treatment on white oak handles with Padauk and G10 accents and liners. Custom mosaic pins and brass lanyard tube. 1. SOLD TO RED333 Red oak handles with spalted tamarind and g10 accents and liners. Custom mosaic pins and brass lanyard tube.
-
Closed
-
7" PSA Marauder 300 Blackout upper on a PSA lower with Franklin Arms AR-C1 Binary trigger and SBA4 pistol brace and MOE furniture. I've only put about 200 rounds through her to try out the binary trigger after I installed it and everything functioned as it should. Very fun range toy, just not for me. I mounted the Sig Romeo 5 after the range session so it is as new with no shots fired with it while being mounted. I'll throw in a milspec charging handle but no bcg comes with it. I do have about 200 rounds of 300 blackout ammo and a bcg I could include for an additional price but asking the low price @%$& as she is.( the trigger cost over $300) The picture isn't the greatest but will take more upon request if needed. I may consider a trade with a rmr optic ready pistol but looking for cash.
-
I have a set of lightly used KAC micro buis. The rear sight has a slight blemish. These mostly sat in the safe. $250 for the set. Will consider shipping. Located around Murfreesboro.
-
;;;;;;;;;;;;;;;;;;;;;;;;,,
-
1903A3 Remington. Very good overall condition. 11/43 two groove barrel. Looks to have all Remington parts. Asking $950. A front G.I. sight hood has been added, no pictures of it right now. Need to be able to legally own firearms and have valid TN. I.D. for purchase.
-
SIG P 229 in 9mm. German produced frame with solid trigger. One 13 round Italian magazine and two 10 round German zipper back magazines. SIG night sights just replaced. Asking $700. No trades at this time.
-
2003 Lexus GX470 174k miles 4.7L V8 Beige Leather, 4wd, good tires, new brakes, front struts, wheel bearings, cv shafts, tie Rod ends, abs sensors. 3rd row seating, sun roof, seat heaters, tow package, $10,000 Will trade for a coupe or sedan with a manual transmission, no autos. Will trade down with cash.
-
WEATHERBY ELEMENT DUCKS UNLIMITED 12 Ga for sale. Comes with pictured choke tubes as well as Undertaker Turkey Choke Tube. Only fired two times to see pattern with Turkey choke. Turkey hunted with last year and that’s it. Comes with a couple boxes of ammo. $625
-
For sale is my new/unfired JTS M12AR 12-Gauge shotgun with 2 x 5 & 2 x 10 rnd magazines, Surefire ProTac 350W light, and 3 boxes of 00-Buck cartridges in full and reduced power: $250. I bought this from PSA on one of their sales for $199.99, (MSRP is $399.99), on a pure impulse buy, and slapped the Surefire light on it for my wife to use as an "Alamo" defensive position in the bedroom. Unfortunately, my wife's T-rex arms, (she's 5' tall) make it impossible for her to shoulder and fire it. I do not hunt, and I have an MPX for home defense, so I have no need for it. Add the cost of the light, 10-rnd magazines, and shotgun shells costs and you'll see this is a good deal for a technically "used" weapon. Sale is limited to established members only, so no low post counts. Fraudsters need not try! I'm willing to meet for transaction at either Murfreesboro's, or Lebanon's, police station parking lot if'n ya don't want ta come to my house.
-
Hard to find Ruger Bearcat for sale. Original box , paperwork.1997 model $575 cash or may trade for ??? Meet in McMinnville, Manchester,Murfreesboro
-
May trade for nice lever guns or Rugers.
-
80 rds of factory HP Make offer. Will trade for other calibers.
-
Looking to pick up a evo 3 foldable stock. Let me know if you have one and your price! Local to Nashville but can travel a bit.
-
This excellent condition Walther PP, 7.65mm has been SOLD. This is the last gun I'm selling from my .32 ACP collection, and it's certainly the best from a cosmetic perspective. Crown over N proof mark, 1975 date of manufacture, Von Stavenhagen sights. This was apparently a police gun, judging from the lanyard ring. Comes with four magazines. When I bought it, it came with two blued magazines -- one with finger rest extension and Walther markings, and one with no finger rest and Manurhin markings. I bought the two silver-colored Walther finger rest magazines separately. $750 to a TN resident legally able to purchase handguns. This is quite a bargain with the four magazines. I live in Chattanooga but travel to Nashville periodically and will drive a reasonable distance for a deal. Not really looking for trades but feel free to make suggestions. I like older S&W revolvers and SIG P200-series semiautos. Thanks for looking, Whisper
-
Tactical Link single point bungee
-
Here's a Wilson Combat CQBE 45acp 5"Bull Bbl that I got in a trade awhile back, Rnd Count- I've ran 2500-3000 through it over the years with out a problem, from my reloads to factory ammo including a couple mags. of +P, runs like a "Swiss Watch, but looks like a used Timex". I lightly blasted the original Armour Tough Finish off of the frame do to it showing wear from a Kydex Holster, the Slide didn't need blasting. This one just needs to be refinished, I just never did just don't have time too much going on so I figured I'd offer up a really good deal for someone and the new owner can finish it how they want it. Now that's out of the way. Wilson Combat CQBE 45acp 5"Bull Bbl w/ plenty of extras- PRICE REDUCTION $2150 CASH. I do have this listed on another Forum so I will monitor both and update as them both if it sells here or over there. Thanks for looking. Here's what is included in this package. 1- Wilson Combat CQBE, Orginal Bag, and Paperwork and 8 Wilson ETM Mags. 2- Custom Made RT.HND Leather Holster and Single Mag Carrier for a 1.5" belt. 3- 4 New Wilson Combat Flat Wire Recoil Springs w/ Guide, 4 New Wilson Combat ETM Mag Spring Kits, 2 New Wilson Combat Extra Power Firing Pin Springs, and 2 New Wilson Combat Bullet Proof Sear Springs and Wilson Combat Cleaning Kit.
