AMSting

Another vote for Mike. He turned a barrel for me to take off some weight. You'd never know it did not come from the manufacturer like that.

I set up the rifle on a stable platform where I can see a "target" about 50 yards away and bore sight that way. If using offset sights, I angle it so the sights are on top like normal as that is how I would use it. The geometry works out better. If you plan to only use it within 25 yards or so, the angle used to sight in doesn't matter. Otherwise, adjustments are no different than if they were straight on.

Did you fire anything afterwards? Look it over when you do the detail strip, but it could have just been a bad primer. Either way, check it at a range before you take it out for a match or use it as your carry gun.

I have one in x39 as well.  I even used it for almost a year when I started 3-gun.  Obviously I would not have done that if it was not reliable.  C Products Defense mags are the best, ASC work fine.  I have a Liberty bolt, but there are several other options.  I had the extractor break once, but they replaced it (eventually) for free.  No other issues.  I also added the extended Red-X firing pin even though the Liberty is supposed to be cut to use the mil-spec pin.  I had a couple fail-to-fires during matches before, but not since I changed it.  I have a CMC trigger, so no way to increase hammer spring weight.  I also only used Wolf and Tula steel case ammo.  I did drill out the gas port, but am not sure I actually needed to.  It was something I read on the internet.   The only reason I changed from 7.62x39 to .223 for 3-gun was because I could see a difference in follow up shot speed.  7.62x39 actually has recoil!   Anyone who says the 7.62x39 AR is not reliable is wrong.  Maybe 10 years ago the mags and bolts were problematic, but that is absolutely not the case now.  Some people without recent actual experience just repeat stuff they read on the interwebs.  As you continue researching, look for the current real world experience and you'll only find good things, just like any other AR caliber.

I have one on a 7.62x39 AR.  Every once in awhile it pops loose and hits my nose on the last shot from the mag.  Not enough to bloody it, but the first couple times it was rather surprising.  It sort of makes me wonder if it is coming loose every shot, but as long as the bolt moves back toward battery it grabs it and locks it forward.

I ordered direct from them during the Black Friday sale.  I got the upper in a week.  I would guess they are swamped now, so they are having growing pains.  I wouldn't get myself all worked up based on what they were doing before, but it could be frustrating getting through to them.

Wideners has Yugo surplus again, but it is $300/ 1260 rounds now.  It was less than $200.

  I agree on the recoil of the XDs .45.  I like everything about the pistol except the recoil.  I had a pre-recall version, so when I got it back from Springfield I noticed it had about 1 lb more trigger pull weight, and it did not feel as nice as the original.  I honestly have not shot it much since getting it back beyond making sure it worked reliably.  It is still as reliable as ever, but I have to say I don't like it as much as I did.  Maybe if I had only had the post recall version I wouldn't feel this way.

The XD line is at least as good as any Glock, at least as far as I have experience.  Mine are extremely accurate and reliable.  The only issue I ever had was using SWC bullets, but never an issue with HP or target.   I also don't get people saying they have an issue with the grip safety.  I have never noticed it.  If you are holding the pistol properly, you won't either.  I'm curious if the same people complaining about the Springfield grip safety also complain about 1911s.

I can't say the pics show something I would worry about. The strike still covers the center of the primer, even if it isn't "centered". I wouldn't worry about it unless you start having problems.

You can get reduced power hammer springs from Wolff.  Just don't go too low or you will have trouble with military primers.   Also, if you are working on the sear, make sure the angle stays positive.  Make sure you test it often.

Go to egwguns.com.  The officer's length guide rod comes with the reverse plug and ISMI flat spring.  You don't need to fill the notch as the plug uses the notch to align everything.   I didn't even need to fit anything.  It was a pure drop in.

Now you're talking.  I would change out the mag springs on any used gun unless you knew they were pretty much unused.  I usually change them out anyway, no matter what.  I have also read Para mag springs were weak from the factory.  I have had two mags give me problems, and the rest have been fine.  They all have Wolff springs now and are working fine.   As for reliability, it will be as reliable as the Colt Officer, which was also hit or miss.  I have had two P12s and both have been perfect.  Mine were also the Canada/ Ft. Lauderdale ones, supposedly the worst for overall quality.  Watch your recoil spring as the short barrels are rough on them.  I think Wilson Combat says to change them out every 300 rounds!  I would look into an EGW full length guide rod and ISMI flat wire spring.  Those springs are rated for about 20000 rounds in an Officer.

I don't get it.  You have a gun that works flawless, and you're getting rid of it because someone else said their gun didn't?  I'd trade you if I wasn't at the other end of the state.

Thanks for posting.  I have been having similar issues (not as frequent, but the same type) with a Glock.  I tried different magazines with no effect.  I'll take a look at the extractor.  Do you have a link to the testing you referenced?  I'm not clear on where the case needs to be for the shake test.

My wife went grocery shopping at WalMart yesterday.  She open carries fairly often, but this was the first time she went to this particular store.  Shortly after she entered, she noticed an employee with a camera and clipboard following her from a distance.  He kept his distance, but didn't lose sight of her.  When she was heading toward the checkout, the store manager and a security guard stopped her.  From a safe distance, the manager asked if she had an HCP.  She said yes.  He said, "Thank you, and have a nice day."  They left, she checked out, and went about her business.   I can't imagine what they would have done if she had said no about the HCP, but at least the employee didn't freak out.

I know TN does not have an automatic "must inform" provision if stopped by a LEO.  Obviously if you are asked if there are any weapons in the vehicle, you must answer truthfully.  My question is about what else (than a handgun, for example) constitutes a weapon.  Is a pocket knife a weapon?  If not, is it because of blade length?   What about pepper spray?

You hit on the two things that went through my mind.  I was afraid it would hit the floor since I wasn't sure of the condition of the remaining strap.  Second, I didn't want to be fiddling with it and have people freak.  I did what Twin said and after I got it under control, braced it with my forearm.  Not exactly natural, but it didn't go anywhere.  Looking back, I probably should have gone to the bathroom and moved it to a pocket, but I was already at the front of the restaurant and the bathrooms were in the back.   I have resolved to examine my straps about once a week now.  The remaining one had a crack in it, so I replaced that one too.  I like the rubber straps because I move the holster from one pair of pants to another.  Kydex loops don't feel as secure, and they also don't allow much flexibility.  The rubber straps don't scuff up my belt either.

I went out to eat with the family, carrying OWB, but covered with my t-shirt.  As I was walking up to pay, my holster felt funny. I reached down and realized one of my rubber belt straps had broken.  I sort of held it with my t-shirt because I wasn't sure about the remaining strap after the first one broke, and it would have hung down at an angle otherwise.   What I am looking for is advice on what my course of action should have been. 

A winch plate will be fine for up to maybe an 8000lb winch.  That should be more than you need for what you are talking about doing.  It bolts across the front frame rails and gives a solid mounting point for the winch.  Use grade 8 bolts for everything.   The rear tow hooks shouild be fine for pulling logs.  I don't know what year yours is, so just make sure the hooks are bolted at the frame rails.  Otherwise you might bend your bumper.   I would also recommend looking at tow straps instead of chains, or at least use d-rings instead of the hooks on the chain.  D-rings won't slip off and fly past your head when under high tension.

I have a shooting chrony beta master.  It does not read the bullet when in direct sunlight.  I taped a piece of newspaper over the diffusers and have not had any issues.

  He turned me on the No. 9 as well.  David knows his stuff.

  Just because you don't see the smile doesn't mean you are not over pressure.  A lot of guys have talked about getting smiles with a stock barrel but then they go away with an aftermarket.  If you are over book loads, you are probably over pressure.  You can still get pressure signs when not over book loads, it just depends on your equipment.  The aftermarket barrel may give you a little more safety margin, but you can still be over pressure.   If you are not loading with a chronograph, especially for hot loads like 10mm, you are treading on dangerous ground.  I have increased loads and seen no increase in speed.  I had no pressure signs, but would not have known to stop going up in powder without the chrono.   Aftermarket barrels are an answer to some questions, but not for nuclear power in a system that can't handle it.

  Neither has gotten the speed I was getting with either the 800-x or No. 9.  Longshot also had sharper felt recoil.  Power pistol is decent, but not as good as the others.   One thing that causes a big difference is the grain weight.  No.9 and 800-x work for heavier bullets.  Longshot might be great for lighter, but I have not gone below 180 grain yet.

Lumber Jack: When you load for 10mm, smiles are pretty common.  Not that you should try to get them, but you will if going to ludicrous speed.  Hopefully you have a chronograph.  If not, get one.  Powder also makes a huge difference.  My favorites are 800-x and No.9.  I never got smiles with the No. 9, but the 800-x is touchy.