Jump to content

Recommended Posts

Anyone around Columbia process their own lead and cast? I’ve been reloading for a couple of years and am now curious about casting. Would like to find someone near by who wouldn’t mind me hanging out while they go through the steps. I’ve seen plenty of YouTube videos but would like to see it first hand before I dive into it. Have been collecting lead for a while and just not sure if it’s right for me yet. 

Share this post


Link to post
Share on other sites

 I highly recommend http://castboolits.gunloads.com/ for someone even thinking about casting. There's a lot more to it than melting lead and pouring it in a mold.

They have enough stickies over there to keep you reading for a month.

  • Like 1

Share this post


Link to post
Share on other sites

I will check it out this weekend. I’ve read quite a bit already. I think I’m good on the steps and background. My interest is in cost effectiveness and time. Mainly I would cast them powder coat 300 blackout subs and maybe some 357. Would it be worth the time and would I save enough to justify it. Then is it something I actually enjoy.

Share this post


Link to post
Share on other sites

I am around dickson ,if you wanted ti drive that far. 

Share this post


Link to post
Share on other sites

To answer your question it depends on what you are paying for lead, i get mine free so i am a .05 a round for 9mm ,40,45 as i pickup my brass so all i pay for is primer and powder.

 

For 30 06, 300 black ,3030  ,300 savage i dont know my cost, but again i only pay for primer ,powder , and some powder coat about every 10k rounds.

 

And as for the folks that want to add cost of equipment in , i have had most of my equipmet more than 30 years so its paid for

Share this post


Link to post
Share on other sites

I did a quick search in this subforum and will link a couple of threads.

Whether or not it's worth the initial investment, time and energy is really a very subjective thing.

Casting and powder coating has allowed our small group of three to affordably cast, coat and tailor loads that meet our perceived needs. Our individual round cost is ridiculously low. But we purchased our components in bulk. 

With the low price and ready availability of components now is an excellent time to store what you can't fashion yourself, and the skill and knowledge gleaned from learning to cast & coat may prove invaluable in the future. 

If you search for threads by Dolomite_supafly or Caster you'll find some excellent info and quite a few varied viewpoints. Keeps things interesting...

These gents certainly helped us a great deal when we started down this path.

 

 

Share this post


Link to post
Share on other sites

I've cast my own for a lot of years. Hard bullets and good lube have kept me going for a long time. Initial expense is high but will pay itself back quickly. Don't expect hi tech bullets with super expansion. But for plinking and target it can't be beat.

 

Tried making my own lube years back. Butter flavored Crisco [what my wife had in the cupboard] and beeswax was what I used. Worked great but every time I went to the range, it smelled so good it made me hungry for a movie and a big bucket of popcorn.

  • Like 4

Share this post


Link to post
Share on other sites
On 7/5/2018 at 1:13 PM, camp said:

I am around dickson ,if you wanted ti drive that far. 

If you don’t mind me hanging out and asking questions I’d love to see it in action.

Share this post


Link to post
Share on other sites
2 hours ago, Backon4 said:

If you don’t mind me hanging out and asking questions I’d love to see it in action.

I sent you a pm

Share this post


Link to post
Share on other sites

I started handloading in 1970 and quickly got tired of paying for bullets, jacketed and/or cast.  Three years into handloading I started casting.  Didn't have a mentor so I stumbled along for many years but was satisfied with the cast bullets I was making for their purpose.  That would have been 1973 so I have been at this for around 45 years.  Only 12 years ago I joined CastBoolits and THAT was when I really advanced my knowledge  casting.  You can read most of the posts without becoming a member but must join to create posts and see all of their information.  Membership is free.  The only cost is that members must remain civil or they will be invited to exit the site.  I like this rule as there are already enough hostile websites one can visit, if the want that type of interaction.  Now I can hunt with cast boolits (their language for a lead cast bullet) and feel as confident on shot placement and game-dropping performance as with any jacketed bullet.  Take a look.  You can thank me later.

Stumpy

  • Like 1

Share this post


Link to post
Share on other sites

As with hand loading, casting will not save you money, you just shoot more for the same price.

I have over 30 molds, check pricing, molds are not cheap. Some are custom that cost a few pennies. My hollow point molds are my pride and joy.:drool:

Swagging is something else I do, slow process but a 40 S&W case swagged to a 44 mag is something to see as it explodes a few milk jugs in a line.:rock:

Cast Boolits is my "goto" site for all this stuff, good luck and please be safe with liquid lead. As it dont care who or what it burns.:ugh:

Edited by RED333
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Grand Torino
      Sierra Bullets has been acquired by Clarus Corporation (NASDAQ: CLAR) for the sum of $79,000,000, “subject to a post-closing working capital adjustment”. Sierra is one of the world’s leading producers of bullets for hunters, sportsmen, and target shooters. With revenues topping $30,000,000 per year, Sierra has long been a major force in the firearms world. Clarus, formerly Black Diamond Inc., is a Utah-based holding company which “seeks opportunities to acquire and grow businesses that can generate attractive shareholder returns”. Clarus also owns Black Diamond Equipment, Ltd., maker of outdoor equipment/clothing for the climbing, skiing and mountain sports markets. 
      http://bulletin.accurateshooter.com/2017/08/sierra-bullets-being-acquired-by-clarus-corporation/
    • By Ray Z
      Has anybody but me had a problem with cases splitting on once fired 30-30? 9 out of 10 of mine split at the neck the first time I try to reload them. After trying 50 or so cases I gave up. 
    • By digger
      Tired of the noise and wear with my vibrating tumbler. Any thoughts about rotary tumblers (wet or dry) and brand suggestions?
      Considering Frankfort Arsenal Platinum Series

The Fine Print

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.
TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.
Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions. TGO makes no claims, guarantees or assurances regarding any such transactions.
×

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines