Jump to content

Recommended Posts

You know the rules. You offer up something shipped free and the person taking the item must do the same. I will start it. If you see something you want respond to the thread with I'll take it as well as what you PIF in return. You may not Claim an item unless you have something to PIF.

I have the following:

5lbs of .40 S&W once fired brass *GONE*

1 revolver holster. Federal Man B325. Fits 4" Smith's *GONE*

1 GunMate pancake holster for 4-5" auto's *GONE*

1 hand made leather holster for large auto's *Possibly GONE*

DSCF1325.JPG

Edited by lowbud

Share this post


Link to post
Share on other sites

I'll take the .40 brass. Dug through my boxes and came up with the following.

Uncle Mike's sidekick IWB holster - size 16. http://www.unclemikes.com/products/inside_the_pant_holsters.html

Allen shotgun shell carrier - very similar to this one, just doesn't have the logo on the front. holds one 25 rd box and 2 shells on side

Amazon.com: Heavy Canvas Single Box Shotgun Shell Carrier: Sports & Outdoors - gone

Edited by abailey362
  • Like 1

Share this post


Link to post
Share on other sites
I'll take the .40 brass. Dug through my boxes and came up with the following.

Uncle Mike's sidekick IWB holster - size 16. http://www.unclemikes.com/products/inside_the_pant_holsters.html

Allen shotgun shell carrier - very similar to this one, just doesn't have the logo on the front. holds one 25 rd box and 2 shells on side

Amazon.com: Heavy Canvas Single Box Shotgun Shell Carrier: Sports & Outdoors

The brass is yours. PM me your address.

Share this post


Link to post
Share on other sites

Allen shotgun shell carrier - very similar to this one, just doesn't have the logo on the front. holds one 25 rd box and 2 shells on side

Amazon.com: Heavy Canvas Single Box Shotgun Shell Carrier: Sports & Outdoors

I'd like to have this, please.

GOT IT!!! Thanks

Edited by Astra900

Share this post


Link to post
Share on other sites

Ok here goes

1 Buchoimer Brown basket weave holster, worn just enough to look cool, came with Smith Model 27 w/4" barrel should fit anything close

2 1 full box of factory Remington 22-250 ( traded gun kept ammo)

Thris thred has tremendous potential as all of us have odds and ends tucked away, Not to mention that it rocks in the spirit of fellowship, which is one of the many reasons for our hobby

Share this post


Link to post
Share on other sites
You know the rules. You offer up something shipped free and the person taking the item must do the same. I will start it. If you see something you want respond to the thread with I'll take it as well as what you PIF in return. You may not Claim an item unless you have something to PIF.

I have the following:

5lbs of .40 S&W once fired brass *GONE*

1 revolver holster. Federal Man B325. Fits 4" Smith's

1 GunMate pancake holster for 4-5" auto's

1 hand made leather holster for large auto's

I'll take the Gunmate pancake holster.

I have a nylon belt holster that fit a .38 or a .357

Share this post


Link to post
Share on other sites
You know the rules. You offer up something shipped free and the person taking the item must do the same. I will start it. If you see something you want respond to the thread with I'll take it as well as what you PIF in return. You may not Claim an item unless you have something to PIF.

I have the following:

5lbs of .40 S&W once fired brass *GONE*

1 revolver holster. Federal Man B325. Fits 4" Smith's

1 GunMate pancake holster for 4-5" auto's

1 hand made leather holster for large auto's

I'll take the Gunmate pancake holster.

I have a nylon belt holster that fit a .38 or a .357

PM me your shipping info and the pancake is yours. Also if that revolver holster is for a 3" revolver I'll take it off your hands.. Model/Type or pic?

Thanks!

Share this post


Link to post
Share on other sites

Does the "large auto" leather holster work for 1911s? It looks about right for my needs (something to simply cover the trigger guard instead of just leaving it sitting on the bedside dresser)

I'll have to dig around for things I can PIF first. I KNOW I have a ton of .30-06SPRG brass, as well as .30-30WIN.

Well, I have a goodly amount of fatigues if they are wanted. Mostly just the jackets, though, mostly medium and large.

A couple hammer springs for a PA-63.

You know, I think I just need to become a benefactor at some point, so I can just sell some of this stuff.

Share this post


Link to post
Share on other sites

C.A.S. I sent you a message about the 30/06 brass.

I have a set of Lee Carbide 9mm dies. The decapping pin is broke. You can get a new one from the reloaders bench for a couple of bucks. These have been HEAVILY used, but will still load just fine. No shell holder. Sizer, expander, seater only.

I can totally see this thread turning into a turkish bazaar swapmeet kinda madhouse thing. COOL!!!!!

Share this post


Link to post
Share on other sites

I have a set of Lee Carbide 9mm dies. The decapping pin is broke. You can get a new one from the reloaders bench for a couple of bucks. These have been HEAVILY used, but will still load just fine. No shell holder. Sizer, expander, seater only.

I'll take the dies and pass on some .380 ammo and brass and a CTAC holster for a SIG 232.

Its not much, but seeing as .380 is so short these days and I don't have anything that uses it hopefully it will do someone else good. It's 8rds of Remington Golden Saber and about as many pieces of brass. Going to BrandonTN.

Edited by TNFlyer

Share this post


Link to post
Share on other sites
I'll take the dies and pass on some .380 ammo and brass and a CTAC holster for a SIG 232.

Its not much, but seeing as .380 is so short these days and I don't have anything that uses it hopefully it will do someone else good. It's 8rds of Remington Golden Saber and about as many pieces of brass.

DONE.

Share this post


Link to post
Share on other sites
I'll take the dies and pass on some .380 ammo and brass and a CTAC holster for a SIG 232.

Its not much, but seeing as .380 is so short these days and I don't have anything that uses it hopefully it will do someone else good. It's 8rds of Remington Golden Saber and about as many pieces of brass.

I'll take the holster & .380 if available...have an OEM RIA 1911 slide release to offer up.

Edited by BrandonTN

Share this post


Link to post
Share on other sites

EVERYTHING IS STILL UP FOR GRABS.

30 pieces of .30-06 brass (pending)

Unkown amount of .30-30WIN BRASS (pending)

Several fatigue jackets

Three-color desert Cover-alls

Load-bearing Vest (Enhanced) [according to the tag] + VERY VERY VERY cheap belt that was included (which is STILL included) {four mag pouches for STANAG, each look to hold two, plus two grenade pouches}

Possibly more, if I ever get around to looking for more.

Edited by c.a.s.

Share this post


Link to post
Share on other sites
EVERYTHING IS STILL UP FOR GRABS.

30 pieces of .30-06 brass

Unkown amount of .30-30WIN

Several fatigue jackets

Three-color desert Cover-alls

Load-bearing Vest (Enhanced) [according to the tag] + VERY VERY VERY cheap belt that was included (which is STILL included) {four mag pouches for STANAG, each look to hold two, plus two grenade pouches}

Possibly more, if I ever get around to looking for more.

Is that 3030 brass only or ammo?

Edited by dralarms
edit test

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By toby1304
      Want to buy Glock 43x. Prefer Black /Black
      Middle Tennessee area. Will drive to meet if not too far.
      Thanks.
    • By SCV Outdoorsguy
      Have decided now is as good as time as any to sell a few of the guns I have accumulated over the years - starting with those I rarely if ever shoot.  Will try to post an ad here - the mechanics of this forum are new to me so please be patient if I mess up with the pictures or protocols.
      First up is my HK P7 M8 in 9mm.  I  bought this gun "new" back in the early 90s and its sat in my safe pretty much the entire time.  The reason I say "new" is that its one of the West German police trade ins that were refurbished by HK to like new and put on the market in a new box  As such it doesn't garner the full premium many P7s do nowadays, but its still a genuine HK P7 in nice shape  and still rare as hens teeth.  It comes with the original box with matching serial numbers, original brush and scraper, original manual, and the 2 original mags.  The box is flawless.  The manual has some oil stains on it from setting on top of the gun in the case.  The gun itself has a slight mark near the muzzle on one side where it sat on the hard plastic divider in the box for 20 years, plus it has a slight discoloring in the bluing on the  rear of the slide, which is typical for these WG trade ins as they reblued them in kind of a funky plum color.  If you are unfamiliar with the P7 its a really cool gun.  It utilizes a squeeze cocker type action, along with a delayed gas blowback, and a fixed barrel.  All of this combines to make the gun extremely accurate and soft shooting, although being an all steel handgun its a little heavy compared to something like a Glock.
      The price is $1600 face to face within reasonable driving distance to Wilson County, and must have TN HCP and do the bill of sale thing.  Alternatively the price is $1635 (USPS money order) plus actual shipping costs to ship from my FFL to yours.   
      Now, hopefully I can figure out the picture posting thing....







    • By Trentls
      I got this about 5 years ago from my uncle. He got it sometime in the 40's that's all I know about the history of it.
      From the S/N I would say it was made sometime in mid 1885.
      I would say it has about 95%+ of the nickel still on it and the barrel looks great for something this old.
      I'm asking $600 and that is because the barrel looks better than any one of these I have ever seen.
      Markings: SMITH & WESSON SPRINGFIELD MASS. U.S.A. PAT'D JAN.24.65  july 11.65 aug.24.69 reissue july.25.71 may 11.80 jan 3.82
      Trades Something in .40 S&W not a Glock please but I'm open to other things








The Fine Print

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions. TGO makes no claims, guarantees or assurances regarding any such transactions.

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines