Alleycat72

What?

I have a good buddy that's a game warden and he said "absolutely not".

Just set up a canned hunt. If it's about doing something with your father than do it. Some may look down on it, but so what. Some of us don't have fathers anymore.

I run suppressors on my guns and shoot at ar500 steel. My neighbors just wonder why I ring a bell some days and some nights.

I grew up in an abusive alcoholic home. I remember being terrified of my father as a child. He chose to die of alcoholism 2 1/2 years ago. I can't tell you how many times he kicked my ass and my mother allowed it. That being said, I think you being a bit sensitive. Nothing Torino said was offensive, accusatory, or insensitive.

???? https://rifleshooter.com/2012/08/wilson-combats-7-62x40wt-wilson-tactical-review/

Would be good for night hunting. Expensive pig gun, but barrels will come out.

I've seen quite a few good bucks through the thermal.

I read 80 KSI, but my brain read 80,000 KSI

"The Army would like the new weapon chamber pressure to be between 60 and 80 KSI (kilopound per square inch)." 80 KSI not 80 PSI. They had to misprint this. 8 million PSI is a bit much.

LOL

Is she hot? Asking for a friend.

Strategic Edge has 1250 yard targets, but anything farther requires private land.

They make trigger kits. My 9mm XDM is stunning.

As it collects copper, groups will go to hell. You would need heavy copper killer and bore paste to get it out. After that a good fire lapping will solve the problem. Check out the bore. Had the same issue with 2 guns.

Does the rifle bore look like an edge of a file?

Get a hand press. Start the bullet with your bench press than put the case in the hand press. Turn the hand press upside down and seat the bullet. This is assuming the powder is below the neck and somewhere in the shoulder.

I'm gearing up for hog hunting now. Trijicon reap ir is on my short list. Got a buddy that hunts in Texas and Georgia. Looks like Tennessee hog hunting laws are changing, but now night hunting with a permit from TWRA.

Not the best, but it works. I had planned on upgrading. You really need a cheek riser with it. https://hi-luxoptics.com/products/hi-lux-optics-long-eye-relief-2x-7x-riflescope?utm_medium=cpc&utm_source=googlepla&variant=36901033421&gclid=Cj0KCQiAh_DTBRCTARIsABlT9MYwrDFAjlPE-cg17lFxmky6xmiE0IZD8Wr2SllDXbhj6LIv_FQo8pkaAkhyEALw_wcB

Yes. I used a scout mount on it.

http://www.loftissteel.com/ They can cut all of you parts out. Make it out of cardboard and take it to them. You'll need to find a friend that can weld it up for you.

100 hp isn't much on a v8. Most stock engines will handle that. Ring gap for NOS is something you should look at.

I have a 25-20 rifle. Fun gun