Jump to content

Silver slide on a Glock, another duracoat job...


Recommended Posts

  • Replies 22
  • Created
  • Last Reply

Top Posters In This Topic

I'm going to ask a dumb question but I'm assuming that you remove parts like the sights and the external extractor? or do you somehow tape them up?

Link to comment
I'm going to ask a dumb question but I'm assuming that you remove parts like the sights and the external extractor? or do you somehow tape them up?

Yes. Strip the sights off and detail-strip the slide.

Mask. Sandblast (aluminum oxide, actually) the slide.

Degrease like crazy with acetone. Mask again, handling only with gloves.

Mix the duracoat and hardener at a 12:1 ratio.

Spray. Let sit 20 minutes. Spray second coat. Then a third. (On a color like Titanium, it needs to be clearcoated afterwards. OD Green did not).

Let it sit for about an hour, then toss it into the oven overnight at 200 degrees. You can skip this step, but it will take longer to cure. Most people only toss it in the oven for an hour, but I sprayed it on Wednesday, and have an IPSC match to shoot tomorrow.

If the gun in question is your baby, I'd wait a week before reassembly and sight installation. Shooting it will be fine at this point. Keep it away from Kydex holsters for at least 2 weeks, though. After that, you're good to go. :)

Link to comment
Guest Hooker

Nice job.

Makes the glock look a little more sophisticated.

A friend had one that had been chromed, we called it his ghetto glock.

Link to comment
Yes. Strip the sights off and detail-strip the slide.

Mask. Sandblast (aluminum oxide, actually) the slide.

Degrease like crazy with acetone. Mask again, handling only with gloves.

Mix the duracoat and hardener at a 12:1 ratio.

Spray. Let sit 20 minutes. Spray second coat. Then a third. (On a color like Titanium, it needs to be clearcoated afterwards. OD Green did not).

Let it sit for about an hour, then toss it into the oven overnight at 200 degrees. You can skip this step, but it will take longer to cure. Most people only toss it in the oven for an hour, but I sprayed it on Wednesday, and have an IPSC match to shoot tomorrow.

If the gun in question is your baby, I'd wait a week before reassembly and sight installation. Shooting it will be fine at this point. Keep it away from Kydex holsters for at least 2 weeks, though. After that, you're good to go. :D

What kind of airbrush did you use? Will a HVLP rig work?

Link to comment
What kind of airbrush did you use? Will a HVLP rig work?

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=47791

No, I'm not kidding. A $6 airbrush.

Duracoat is thick. Through a gun or a *good* airbrush, you'll need to buy some reducer to thin it. The cheap airbrush will spray it just fine while it's nice and thick, just turn the regulator up to about 40 PSI.

Acetone works great as a thinner/remover until Duracoat dries. And it's cheap.

Here's a quick "how to" I did on the orginial ODGreen finish I applied to this gun:

http://glocktalk.com/forums/showthread.php?t=786852&highlight=duracoat

Link to comment
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.