Dane

I picked up 6 of these off eBay from China. They claim 1000 lumens. Single AAA battery. They were around $3 each. Been carrying one in my pocket for a few days and it seems pretty decent. Figure I can't go too wrong for $3.

I know. But I have seen too much oil causing various Glock issues.

Too much oil on it. Strip it down, dry it up and follow Glocks recommended 4 or 5 drips of oil.

Probably not since it is a single action.

I always thought it was Sugar free Gummi bears.

It is a 2 pole 30amp switch. Sent from my SM-G930V using Tapatalk

Some pics of what this ended up. Sent from my SM-G930V using Tapatalk

It is a 24' enclosed trailer Sure Trac 8.5' wide. Right now the fridge is a 14cuft residential unit. The AC is in the future so I don't have a spec on it. I'm considering when I add the AC to make it a heat pump unit as well. If not I'll go with a propane rv heater. Sent from my SM-G930V using Tapatalk

Right, but the feed coming in is only one leg, 120v. So I only have a hot wire, neutral and ground coming in. Sent from my SM-G930V using Tapatalk

Got to ask.... what were you working on?

Since I will not always be plugging into a box with known good power the switch is so I can check polarity and ensure a good circuit before powering my box. Also plugging the 10/2 into the lugs without a jumper won't work since this is only a 120v system. I have to jumper the lugs regardless of anything else to supply power to both legs of the box.

Currently I have a refrigerator operating in the trailer. I plan on adding some lighting and an A/C. Sent from my SM-G930V using Tapatalk

The 10AWG will be from the connector on the side of the trailer to the box, about 4-6 ft. The cord is one I ordered pre-made so it should be of adequate wire size for the length. Thanks for the reply!

Since this is the best place on the net to get good advice on anything: So I pretty fair at electrical work but I'm working on adding 120v power to my enclosed trailer. Looking for some reinforcement that I'm not going to burn the trailer down or kill myself. So here is what I have in mind: I'm going to use a 30a twist lock <This> to enter the trailer. From there I'm going to run a 10/2 w/ground wire to run into <This>. Now from there I'm planning to adapt the box to hold a 30 amp 2 pole <Switch> and hook both the neutral and hot to this switch. I'm also going to wire some 120v LEDs across the hot and neutral to indicate power as well as the neutral and ground to indicate reverse polarity. From there I'm going to run the hot wire to a 30 amp single pole <breaker> to feed the panel. Since this is only 120v system I am going to put in a jumper across the lugs to power up the other side of the box. One question is should I isolate the ground and neutral from each other in the panel. Thanks!

The difference is roughly 2" in height. They should work fine under stock ride height. Easy way to check would be to turn the wheel hard each direction and make sure nothing is within 1" of the existing tire. https://www.google.com/search?ei=lh2dWMarJquwjwSY2Z-4Dw&q=225%2F60r16+dimensions&oq=225%2F60r16+dimensions&gs_l=mobile-gws-serp.3..0.18724.19317.0.19740.3.3.0.0.0.0.244.405.0j1j1.2.0....0...1c.1j4.64.mobile-gws-serp..1.1.160.VIjB3ddSr6A https://www.google.com/search?q=215%2F60r16+dimensions&oq=215&aqs=chrome.1.69i57j35i39j5j69i59.1590j0j4&client=ms-android-verizon&sourceid=chrome-mobile&ie=UTF-8 Sent from my SM-G930V using Tapatalk

I bought a new truck in AL. They charged TN tax and sent the title info in for me. I received a call from the title office in a week to come get my tags. Used might be different though. As has already been mentioned if you are charged tax then that amount will be reduced from what you owe TN when you register the vehicle. Sent from my SM-G930V using Tapatalk

Husqvarna and Jonsered are the same company. Typically you will get a few more features for the same $$ with the Jonsered saws. Sent from my SM-G930V using Tapatalk

Made it up to the security check at a federal building once before I realized I still had my gun on. Pretty sure the security guy knew what happened when I did a u turn just to return a few minutes later. Sent from my SM-G930V using Tapatalk

I have a diesel and always fill with the engine running if I'm not going into the store. Most remote starts are tied to the brakes so if the brake is depressed (as one has to do to get most vehicles in gear) the engine will quit. Sent from my SM-G930V using Tapatalk

I own several glocks and they are my go to carry gun because no matter what they shoot. And if one has to go into evidence in the case of a shooting I know it'll come back because who would want to steal a glock. Now my favorite gun to shoot is my Sig RCS 1911. Smoothest most accurate gun I've shot. But it is too nice to make it into my edc line up unless I'm OCing which is rare. Sent from my SM-G930V using Tapatalk

With lodge cast iron you can be sure you are getting a smooth bottom. I won't buy any other brand. Some of the Chinese crap is rough as sandpaper. I've bought lodge seconds that are 10x better than other company's best products. Sent from my SM-G930V using Tapatalk

Tractor supply just put all theirs on clearance. Sent from my SM-G930V using Tapatalk

2 Pork shoulders for work on Friday and a turkey for tomorrow. Sent from my SM-G930V using Tapatalk

I'll second what is said here. in my opinion it's a pay now or pay later situation. unfortunately the pay later can be more costly and emotionally taxing. Be patient with your search and find the right breeder then the right pup. Many breeders intentionally do not have litters this time of year due to puppies making the WORST Christmas gifts ever.

9 hours on a tank. A 20lb propane tank holds 4.7 gallons.