Leaderboard
Popular Content
Showing content with the highest reputation on 05/11/2025 in Posts
-
5 points
-
3 points
-
3 points
-
3 points
-
Springfield Armory 1911 6 inch, Custom Shop set up for PPC in .45 auto.. Has an aristocrat bar sight system full adjustable and groups well even at 50 yards. This sight can be preset for three distances. Nowlin barrel with a custom fit bushing from the factory. This is a totally factory set up gun, would work well for bullseye shooting also. sold.... Not looking to trade. Thanks for looking.3 points
-
3 points
-
Brand new, unfired. Frame, trigger, and frame internals are from a USP expert which means it also has full ambi safety. See below for explanation. Gun has never been fired and comes with box, 2 15 round mags, and all normally included items in the box. $1000 Why the swap: Rooftop Defense worked a deal with HK to do a limited run of factory OD green USP9s. I wanted an expert but they sold out before I could get one so I bought a tactical then bought a normal black USP expert and swapped the slides and jet funnel magwell.2 points
-
The things to call out here would be that the Carry has a fixed rear sight instead of adjustable, and remains when the optic has been installed, as a BUIS. The firing pin block was a good addition for a carry oriented pistol, especially in light of the ongoing P320 imbroglio. I'm probably in the minority here, but I applaud the addition of a decocker, though I'd say it probably could be trimmed down a bit more. I find the thumb safety on CZs difficult to reach and use, due to their location and safety lever shape, so I prefer all my CZs to be in DA/SA/decocker mode. It's hard to see how it can offer 3x the value of my optic cut P-07, but I'm glad to see this variation added to the lineup.2 points
-
A guy ran one of these (Shadow 2 Carry) in a class I was in last week and that thing is a shooter. Y'all are comparing it to guns that have been fully customized, which takes time and money. This gun is 98% of that and it is turn-key. Just keep that in mind.2 points
-
I too am a CZ fanboy, switched my EDC back to CZ from Glock last year. I have a fully cajunized PCR; internals plus milled slide for a holosun 507 with no plate This is my second CGW pistol, they do great work. Cost wise, probably similar to this model after you add a dot. If I bought it and felt it needed more refinement from any custom shop, I would be pissed off.2 points
-
Selling a custom .40 caliber Beretta 96 Brigadier, refinished to look like the Samurai Edge from Resident Evil 2. Priced at $750 (reduction from $900) Low round count, under 400. This has a rarer reinforced Brigadier slide, now more commonly seen on their competition pistols. The additional strength is a perfect accompaniment for increased .40 caliber pressures. Single/Double action. Great condition. Mild marring on the barrel finish exterior where it connects the slide. This is inevitable. While nearly imperceptible, for the sake of honesty, the backstrap is missing small amount of material, made further unnoticeable with polishing. Several parts have been upgraded. * LPA adjustable marksman sights * Skeltonized hammer * Steel trigger * Steel extended magazine release * Steel guide rod * D-spring * Wolff trigger spring * OEM Deluxe Grade 3 Walnut Presentation Grips * CCR Refinishing job: Cera-hide slide, barrel, guide rod, parts, OEM inox lower and parts. * 5 magazines, 2 have been refinished with CCR cera-hide * Leather and sheepskin pistol rug The additional components alone are valued at around $590. An additional benefit, because this is a .40 96, it can be converted to a 9mm with little effort. Likely a barrel drop in, but might have to change the extractor or ejector. I don't believe a 92 can be converted to 96.2 points
-
1 point
-
Sold on Armslist (in three days). Note: Both Classic Firearms and Bud's Gun shop have raised their price on this in the past few weeks. At Classic, with tax and shipping, their price is now $1245 (not including transfer fees. Selling this New in Box Zastava ZPAP M70 AK-47. It's the Cadillac of the AK family. I am only selling it because I have detached rotator cuffs and arthritis, What seemed light 20 years ago is now quite heavy. Comes with one Yugo 30 round bolt hold open magazine. $1100 OBO. Not interested in any trades. Please do not message me with trade offers or to ask if it is still available. If the listing is active, it's still available. Local pick up in Clarksville only. Please do not ask me to meet you halfway between Clarksville and anywhere. Local pick up in Clarksville means exactly that. PRODUCT DESCRIPTION The Zastava ZPAP M70 is a premium Yugo-pattern AK-47 rifle with updated features including a bulged trunnion, stamped receiver, cold hammer forged chrome-lined barrel, and classic walnut furniture. Chambered in 7.62x39, this rifle offers plenty of stopping power in a robust, uber reliable package that is equally well-suited for range use or self defense. It features a convenient bolt hold-open notch on the safety / selector lever, as well as an optics mount on the left side of the receiver. Specifications Manufacturer: Zastava Model: ZPAP M70 Barrel16.3" Cold Hammer Forged Chrome-Lined Receiver Stamped 1.5mm Trunnions Bulged/Forged Caliber7.62X39 Thread Pitch14X1 LH Fire Control Group Heat-Treated Matched Weight7.9 Lbs (Unloaded) Overall Length37" Warranty1 Year SKULNG-ZASTAVA-ZR7762WM Country of ManufactureUnited States License RequirementFFL Mfg. Part NumberZR7762WM UPC685757098120 Caliber/Gauge7.62x39 Action Semi Automatic Barrel Length16.3" Threaded Barrel Yes1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
I have a rare limited production Troy XM177e2 for sale. I purchased this unfired from another member a couple years ago and it’s time for it to move on. I fired maybe 50 rounds through it. These are pretty tough to find and are a very high end clone that Troy did. Reference this review for more information: https://www.thefirearmblog.com/blog/2016/05/21/troy-introduces-xm177e2-replica-nra-2016/ I have the original box with paperwork, commemorative coin etc. I will also include the Leupold carry-handle rail, a GI gooseneck, and the front sight post light mount. Has one GI 20rd mag. Sling pictured isn’t included. Also has a Geissele trigger installed that can be included for an extra $100, if not I will put back in the original it came with. Asking $1000 face to face around Murfreesboro and be willing to show TN DL. Only trade interests would be WWII pistols or unfired Ruger 10/22 or Ruger Mk .22 pistols with threaded barrels.1 point
-
Beautiful collector's piece. Has all the original paperwork, including certificate of authenticity, manuals, etc., and even the receipt from the original sale in 1999. Also includes a special edition patch and the polymer grips. Comes with belt, holster, and mag pouches shown in box as well as an additional belt with holster and mag pouches already setup. Not sure why the duplicate, came with the full set when I bought it at auction. Only put one mag through it and I'd guess that's as much as it's been fired. Only wear appears to be some light tarnishing on the brass plate of the grip on the left side. Box has wear just from age. Asking $1600 $1200 OBO1 point
-
1 point
-
Sorry, wrong area. Can a mod move it? Thank you1 point
-
Update: Ordered my Sandman-X on an NFA trust. I understand that they are running about 14-days to process, so maybe I'll have it before the month ends. Guess we'll see.1 point
-
1 point
-
I am also a big fan of SA/DA w/ decockers and absolutely love the way CZ does it. Nobody does it better, IMO.1 point
-
1 point
-
Safety Reminder for Buyers and Sellers This is an automatic reply meant to protect you as a buyer and a seller on TGO. Use the Buyer/Seller Feedback feature to research who you are dealing with. Please come back and leave feedback for each other after the transaction is complete. Your experience will help others. Never agree to use an electronic form of payment to buy or sell a gun! None of the electronic payment services will protect you against fraud in a firearms transaction. They all have terms of service FORBIDDING the use of their services to buy/sell guns. DON'T DO IT. Be very wary of anyone who insists on brokering a deal in private or outside of TGO. Scammers almost always prefer to operate out of the public eye. The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link. Everyone should read them at least once! ~~~ This was an automatic reply ~~~1 point
-
Kyle is a fantastic guy to trade with-always has great communication and takes super good care of his stuff! Good luck with selling man!1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
The Icom IC-7100 covers all the HF bands, 2 meter band, and 440 band. It has multiple antenna ports. It is still in production. I’ve used one mobile, and it works well.1 point
-
### SOLD ### Staccato C2 DPO Optics Ready with Extras Up for sale is my barely used Staccato C2 DPO (Optics Ready) with some extra stuff you'll be glad you had. The optic on this gun is NOT INCLUDED in the sale price, but I'd be willing to negotiate with you if you really must have it. This gun has less than 500 rounds through it and has rarely been carried. Truth be told, I had an issue with the anodizing on the frame of my first C2 and when I sent it to Staccato for warranty service they replaced the entire gun with this one. That's why the round count is so low and why it looks virtually new. They stand behind their product like no one else, in my opinion. The C2 is roughly the size of a Glock 19 and the aluminum frame makes it light-weight and comfortable to carry. Most reviewers agree that the C2 is the ultimate carry gun out of the Staccato lineup, preferring it over the smaller C series. You can read more about them here: https://staccato2011.com/products/staccato-c2 The only reason I am selling this is because I use my Staccato XC more often and I want to free up some money for another purchase. Sale Includes: 1.) Staccato C2 DPO shown. (Retail $2199) Matching original OEM softside Staccato pistol case. All original bits and pieces. Two (2) 16-round OEM Staccato magazines, stainless steel. 2.) Holosun EPS MRS Optic. (Retail $329) Multi-Reticle System Solar Backup Mounted and Zeroed 3.) Staccato EPS Mounting Plate with Rear Iron Sight (Retail $130) 3.) Two additional OEM Staccato 16-round Mags. (Retail $140) Total Retail Value: $2798 >>> SOLD! <<<<< Terms of Sale: Cash Sale. No trades. In-Person transaction in a very public spot in Spring Hill or Franklin areas (middle Tennessee) Established members greatly preferred. Benefactors even better. More Photos: The gun is as shown here. Nothing is hidden, nothing is edited in the photos.1 point
-
Finding the radio isn't the biggest challenge here, it's going to be antennas. HF antenna are huge, but you can get some but most will only cover one or two bands. Not trying to "challenge" you, but why do you want all bands? Most hams only use 2 meter and 70cm mobile. To answer your question though, icom 706, yeasu ft-891 both come to mind with several others as possibilities.1 point
-
I'm a CZ fanboy and as much as I want to justify this gun I just can't. I got to handle one in the local shop last week and although it's great, it's not heads and shoulders above the P-01. For the price of a P-01 and $100 I can have the same gun (non optic) with a better trigger feel. I picked up a P01 with an optic but not too long ago for much, much less than the MSRPO so that also influences my take on this one.1 point
-
1 point
-
1 point
-
1 point
-
Friends and I were down by Calderwood Lake just ahead of the Dragon about the time it hit. We were riding in the car and didn't feel much since we were making a lot of twists and turns anyway. When we stopped to rest a couple came up and said it gave them quite a jolt. The good Lord does shake us up at times in one way or another.1 point
-
I had a nephew leave there with a history degree. I wondered what the hell he was gonna do with that. Turns out he’s selling houses and probably making more money than anybody in the family. The wife’s uncle graduated from there in 1958 on a GI bill after serving during the Korean War. He retired from NASA, still lives near Huntsville, and was up here last week to visit. I’m pretty sure he worked on the actual plane you see behind him.1 point
-
1 point
-
1 point
-
My little buddy Jamie James. Bichon Frize. I noticed that he sleeps in one particular place on the couch in the living room. I went over one morning to pet him and I noticed that from his sleeping spot he could see the driveway, the road, the back door, the front door and the hallway, all from this one spot. At night, I can tell if he growls, whether it's a dog or a person.1 point
-
In recent years past. Chuck Warner of Elite Warrior Armament did a run of about 30 stainless billet steel BHPs. He made some changes to improve on the original in some minor areas, the most obvious of which was a thicker frontstrap to allow aggressive checkering. I have a friend who ended up with one of these and he approached me to do a minor tweak or two on it. I took the opportunity to take a good set of photos while I had it. It was a fascinating labor of love and I kind of wish I had gotten in on the original sale when he was making them, but funds and fortune were at odds once again.1 point
-
1 point
-
1 point
-
I have this identical double barrel cork gun. I bought it off eBay a few years ago. My attention is to put it in a gun rack in the back window of one of my antique pickup. Another one of those "round to it" projects.1 point
-
This gun makes absolutely no sense. Until now, “Shadow” meant no firing pin safety and by default, a better trigger. So now CZ makes a Shadow that isn’t a Shadow. The firing pin safety is not really necessary unless you carry hammer down instead of half cock, which only an idiot would do. BUT if you have to have a firing pin safety and want a decocker, the P-01 is less than half the price of this gimmick.1 point
-
Well, I for one am not impressed. My gun would have been on me or within grabbing distance and in my hand after the first knock. And I'm not even a red head. LOL :D Oh, yes, one more thing.....the guy would have had at least one bullet in him before he had a chance to pass out. ;)1 point
This leaderboard is set to Chicago/GMT-05:00