All Activity

Safety Reminder for Buyers and Sellers This is an automatic reply meant to protect you as a buyer and a seller on TGO. Use the Buyer/Seller Feedback feature to research who you are dealing with. Please come back and leave feedback for each other after the transaction is complete. Your experience will help others. Never agree to use an electronic form of payment to buy or sell a gun! None of the electronic payment services will protect you against fraud in a firearms transaction. They all have terms of service FORBIDDING the use of their services to buy/sell guns. DON'T DO IT. Be very wary of anyone who insists on brokering a deal in private or outside of TGO. Scammers almost always prefer to operate out of the public eye. The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link. Everyone should read them at least once! ~~~ This was an automatic reply ~~~

2000 CCI BR4 match primers. $120 per 1000. Mount Juliet area. Prefer not to ship. Purchased about 3 years ago.

Safety Reminder for Buyers and Sellers This is an automatic reply meant to protect you as a buyer and a seller on TGO. Use the Buyer/Seller Feedback feature to research who you are dealing with. Please come back and leave feedback for each other after the transaction is complete. Your experience will help others. Never agree to use an electronic form of payment to buy or sell a gun! None of the electronic payment services will protect you against fraud in a firearms transaction. They all have terms of service FORBIDDING the use of their services to buy/sell guns. DON'T DO IT. Be very wary of anyone who insists on brokering a deal in private or outside of TGO. Scammers almost always prefer to operate out of the public eye. The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link. Everyone should read them at least once! ~~~ This was an automatic reply ~~~

SIG SNAKEBITE SE .308/7.62 NATO for sale. 2 stage trigger, ambi mag release and safety. 1 twenty round Pmag . FDE upper and lower receiver. $1600. located in Mount Juliet. Only trades considered would be for WWI,WWII German and American arms.

I had seven Staccato's, P 4.14 Full, P DPO, two C2 DPO's, two C Single Stack's, and a CS DPO. They are all great guns and handled great. I sold all but two of them, I kept one C that I had Monsoon Tactical do their Genghis Comp on it, had the Bbl coated in DLC I then installed a Wilson Combat Bullet Proof Single Side Thumb Saftey and a flat faced trigger. The CS I have I did the exact same mods except for the Comp. I rotate carrying them they shoot great never had a problem with any of them. I'm going to get the new C Double Stack soon, overall they are great for the price point. Now a NightHawk, Gun Crafters, Staccato's XC and few other higher end 2011's are on another level as far as quality and more attention that goes into building them. Overall I'd rather carry a 2011, and that's coming from someone who is a die hard 1911 fan, I had fifteen of those once from a Springfield Armory basic GI model to a couple of Wilson Combat CQBE's a few NightHawk's five Les Baer's and Gun Crafter.

Thanks!

Bump for last price reduction, after will take down and will repost at a future date.

Up

Magpul mags still available

I shoot a beretta a400 for ducks. Before that a beretta 390. Very happy with the beretta with the exception of the a300. My buddy has one and we can’t get it to feed consistently. I have several friends that run Benelli SBEs and they all seem to do fine. Might also look at Retay. I’ve handled a few of them and they seem well built for the price point.

Bump

I'm interested. I can come by today or tomorrow for pickup.

Safety Reminder for Buyers and Sellers This is an automatic reply meant to protect you as a buyer and a seller on TGO. Use the Buyer/Seller Feedback feature to research who you are dealing with. Please come back and leave feedback for each other after the transaction is complete. Your experience will help others. Never agree to use an electronic form of payment to buy or sell a gun! None of the electronic payment services will protect you against fraud in a firearms transaction. They all have terms of service FORBIDDING the use of their services to buy/sell guns. DON'T DO IT. Be very wary of anyone who insists on brokering a deal in private or outside of TGO. Scammers almost always prefer to operate out of the public eye. The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link. Everyone should read them at least once! ~~~ This was an automatic reply ~~~

Looking for a Glock 43X in like new condition around Knoxville. Thanks

I have one of these with a S8g Romeo One. Great shooting pistol. GLWS

750

Safety Reminder for Buyers and Sellers This is an automatic reply meant to protect you as a buyer and a seller on TGO. Use the Buyer/Seller Feedback feature to research who you are dealing with. Please come back and leave feedback for each other after the transaction is complete. Your experience will help others. Never agree to use an electronic form of payment to buy or sell a gun! None of the electronic payment services will protect you against fraud in a firearms transaction. They all have terms of service FORBIDDING the use of their services to buy/sell guns. DON'T DO IT. Be very wary of anyone who insists on brokering a deal in private or outside of TGO. Scammers almost always prefer to operate out of the public eye. The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link. Everyone should read them at least once! ~~~ This was an automatic reply ~~~

For sale -- S&W Model 41 .22 semiautomatic, excellent condition. This gun is a pre-1969 model (serial no. 77xxx) with cocking indicator and two factory magazines. Comes with original box. All yours for $1100, if you're a TN resident legally able to purchase handguns. I'm in Chattanooga but will travel a little bit for a deal. Not really looking for trades right now except that I do need a 2" Model 12 or 2" Model 15. Thanks for looking, Whisper

Very nice.

That thing is gorgeous. Like you thought if I bought it it would sit in the safe as a decoration. GLWS

On the slide, it will say Made in ….. it matters to buyers.

Safety Reminder for Buyers and Sellers This is an automatic reply meant to protect you as a buyer and a seller on TGO. Use the Buyer/Seller Feedback feature to research who you are dealing with. Please come back and leave feedback for each other after the transaction is complete. Your experience will help others. Never agree to use an electronic form of payment to buy or sell a gun! None of the electronic payment services will protect you against fraud in a firearms transaction. They all have terms of service FORBIDDING the use of their services to buy/sell guns. DON'T DO IT. Be very wary of anyone who insists on brokering a deal in private or outside of TGO. Scammers almost always prefer to operate out of the public eye. The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link. Everyone should read them at least once! ~~~ This was an automatic reply ~~~

This one hurts to post, but if I'm honest with myself, I've sat & stared at it for 2 years now. It's just too damn pretty for me to hunt with & I know I'm going to spend more time worrying about it getting scratched than I actually would hunting. I built this up from parts. The action is a Sears model 52, which is the Sears specific brand Winchester Model 70. I had the entire action blueprinted & rebarreled to 6.5x55 Swede by E.R. Shaw. The barrel is 21", 5R rifled with a 1:8 twist. The profile was turned to match the factory M70 barrel which is basically a medium/light Sporter. The barreled action was then mirror polished & sent to a specialist refinisher in Wyoming for bluing. Along with that, the hinged bottom metal, bolt shroud, trigger, grip cap, scope mounts, sling swivels & all screws & fasteners were sent for color case hardening. While all the metal was away for finishing, I found an unfinished, Exhibition grade walnut stock & set about hand fitting & finishing. I hand sanded everything to 800 grit & applied 24 coats of Alkanet oil, wet sanding the first 12. Once the color I wanted was achieved I applied 32 very fine coats of polymerized Tung oil (over a period of about 4 months) The stock was then sent to Ahlmans for hand cut checkering in a 22tpi Winchester point pattern. Once finished, the checkering was then very lightly oiled. Once it was all back here & together, I added a Leupold FX-3 6x42 scope. I've taken it to range 1 time to zero & work out a load & that's literally it. I don't think I've fired 40 shots since I finished it. The whole project was a labor of love, because I wanted an Heirloom Quality gun, only to find out that I'm far better served with working guns. I don't know how many hours went into the build, but I'm pretty sure I clocked over 100 just in the stock. Since then, it's literally sat in the cabinet slathered in anti-rust. I've occasionally taken it out to look at & fondle. It's a crying shame to just have it sitting & it needs to go to someone who'll actually use & appreciate it for what it is, rather than just being a decoration. I'm not gonna lie, I'm pricing this at slightly less than I have in it, but not much & the price is NOT negotiable. I paid nearly half the cost just for the stock alone. $2000 will buy it & if it doesn't sell for that, it can stay in the cabinet. I'm only selling her now to fund a used Harley purchase (unless someone wants to part trade me for a ratty big twin.....) Link to photo album....... https://imgur.com/gallery/LrNFN1l

So I just ran 3 cylinders of Buffalo Bore .357 through it and, I am in love! the weight calms the recoil enough to make it managable, much more than I thought it would. I will zero my sights later but was able to put all 18 bullets on the steel plate at 10 yards, so I am happy. I will put a bunch of .38 special Gold Dots through her to zero it in. I absolutely love the Wilson sights and I think the Gold front sight is the best I can have on this revolver The only negative comment I can make about this when it came from colt, the rear sight, the Wilson is leaps and bounds better and an upgrade for Pythons and Anacondas that I highly reccomend. I intend to leave the Orange front sight on my upcoming 4.5 Anaconda but already have the adjustable rear waiting for it.

Not a fan of the "modern" style exactly. I prefer the Para Ordnance look. But I do like many of the old look 2011s. the double stack 45 is definitely a great piece. Not saying the race gun style is bad, some are really good looking. I just prefer the original 1911 look.