Leaderboard

Small antler knives. Same blank from 4116 SS. Antler length slightly varies but generally they are 6 1/4" with 2 7/8" blade. Comes with nice little leather sheath. $50 each shipped. 1. Sold to KahrMan 2. SOLD to smokin45 3. Sold to KahrMan Scalpel knife D-2 steel 6" long 2" blade. Rosewood handle. Comes with kydex sheath shown. $75 shipped.

And are still wearing one while driving in a vehicle by themselves.

I HAVE THIS REAL NICE BERETTA 85BB (8 ROUND SINGLE STACK) PISTOL MADE IN 1982/83 IN ITALY IN 380 ACP, WITH A 3.65" BARREL, SET OF MICARTA THIN BLACK GRIPS AND A SET OF WOOD GRIPS. PISTOL COMES WITH A BERETTA CASE, OWNERS MANUAL, 3 FACTORY 8 RD MAGS PLUS A CARBON FIBER RH IWB HOLSTER. THIS PISTOL HAS A DA/SA TRIGER PULL, DA IS NICE AND SA IS REAL SWEET. THIS TYPE HANDGUN WAS USED IN EUROPE FOR POLICE CARRY. THIS WOULD MAKE A GOOD CCW PISTOL OR FUN RANGE GUN. ACCURACY AND RECOIL IS EXCEPTIONABLE. $500, NO TRADES AT THIS TIME. BUYER MUST BE LEGAL TO OWN A PISTOL AND HAVE A TN DRIVERS LICENSE AND/OR TN CCP (PREFERRED), PM ME IF INTERESTED.

Putting a couple up for sale to fund an upcoming trip CZ-75 pre -B. Transitional model with the squared off trigger guard. No firing pin block sets these apart from the 75B models. This one is in really nice shaped with very little signs of wear. Comes with the box and a single mag. Feel free to PM with any questions. $700

Hello i have a lightly used ruger lcr in 22lr. This model carries 8 rounds and is super compact and easy to shoot. I added a bit of orange paint to the front sight for better visibility but it can be wiped off and it also comes with a lasermax red laser. Have a desantis holster that comes with it as well. Prefer cash may listen to trades 6159099003

Seems to me that Republicans are just Democrat Lights.

This gun has been fired very little and only have minor scuffs on the furniture. This 20 gauge has a 28 inch barrel, accepts rem-chokes and accommodates 3 inch shells. 425.00

Hello everyone! I’m a native Tennessean, living in Spring Hill, and have had a lifelong love of firearms history in general. My firearm related passion is shooting handguns, especially pistols. I try to hit the range once a week, or every other week. Hammer fired da/sa pistols are my thing, but there’s a couple striker fired handguns in my little collection, too.

$old

Hey all, I just came aboard and moved here from SC. I'm a husband, retired law enforcement officer, hunter, outdoorsman, fisherman, bbq'er, into history (WW2) and like to drive to see new area. Glad to be aboard.

Selling as a whole: Side-Charging 5.56 Anderson lower/10.5" barrel/Strike Industries brace/Crimson Trace red dot/Magpul co-witness pop up sights/(4) Pmag 30-round magazines loaded with steel case ammo Mossberg 500 12 gauge/Hogue overmolded grip and foreend/Heat shield/shell holder/light/25-round box of Black Aces 9-pellet 00 Springfield XDm-10mm optic ready/threaded barrel/Springer Precision muzzle compensator/(3) 15-round magazines Springfield XD-9mm/(6) 16-round magazines Pelican Vault Gun Case All firearms are in very good to excellent condition. The 9mm has never been fired. No longer have room for these so selling as a whole for $2,000. Local meet up and cash only transaction. Knoxville area...

Up for sale is my Glock 47 MOS. It is in Lnib condition with no flaws to mention. Comes in factory case with 3 17rd mags and all of the factory accessories. Asking price is $560. Not interested in any trades.

BOTH SOLD -- Thanks for looking. I need room in the safe, so here are two old-school carry guns ready for adoption. These are a couple of classics that in very good condition and with lots of life left in them. 1. S&W .457 .45 ACP -- It's been eclipsed now by the Shield .45, but for a while this was the smallest and lightest .45 ACP that S&W offered. Bobbed hammer and one-sided safety show this was designed to be carried as discreetly as it was possible for a .45 with the same capacity as a full-size 1911. The main criticism of these guns in the used market today is that it they don't share magazines with many other S&W semiautos, so mags aren't plentiful and are frighteningly expensive when you can find them. (There are some for sale on GB right now for more than $150 each.) But fear not -- Uncle Whisper has you covered. This little gem comes with five magazines, so you don't have to worry how you'll get more if you lose one. If you lose four, then you'll be in trouble, but you're not that careless, are you? $575 to a TN resident legally able to purchase handguns. 2. SIG P239 9mm -- I sold my other P239s but held onto this one because it has the Von Stavenhagen sights that I prefer on SIGs, but now it's time to let it go as well. This one has Hogue G10 grips because I thought the OEM plastic grips were just a bit too small and slick. It's a great-handling little gun. The P239 hasn't been discontinued that long, and magazines are still available from all the usual places, but this gun is well prepared already -- it has four factory SIG magazines; three standard-size magazines plus a 10-round extended mag. PLUS, as an added bonus -- three brand new recoil springs, ensuring that you have both plenty of mags and recoil springs to keep this gun running for decades. INDEPENDENCE DAY PRICE REDUCTION -- $525 to a TN resident legally able to purchase handguns. I live in Chattanooga and will travel a reasonable distance for a deal. Trades considered, but I'm not really looking for much these days except a 12-gauge Browning Automatic 5, which I want for an SBS conversion, or a Marlin 336 in .30-30. I probably don't need any more ARs or plastic handguns Thanks for looking, Whisper

Got one off another member recently and I run 1-200 rounds through it every range trip as practice for my LCR 9mm, super fun and accurate get-off-me gun with an awesome factory trigger. GLWS, someone will be happy with it I’m sure

I've went to using a roll or front bag when I shoot off the bench. I generally use 2 of the " pillow bags, one ( if I need it under the stock at the heel and the other between the shoulder n butt. It works well prone too ( if I could just get up from being prone...HEHEHE..). I like the " pillow bag " cushion better than the elastomer pads. It seems like they cushion the recoil a bit better . leroy....

MTSA will host its monthly IDPA match on July 5th. 5 stages around 90 rounds. Gates open at 7:00 with match start at 9:00. $20 match fee. I can create another squad if I have enough to do so. If the wait list fills, I'll make it into Squad 4. https://practiscore.com/mtsa-idpa-match-for-july-2025/register

I will take 1 and 3.

Welcome from Spring Hill.

I’ll have to check out Modern Warriors. I live in Bellevue and use Royal Range since they are so close and have a good setup. Always interested in trying new places, though.

Welcome aboard!

You’re very welcome. This one is pending sold now to a local ham in my radio club, but feel free to message me if you need any help getting going!

Sounds like great advice. Thank you!.

I will take #2 please

Welcome from Knoxville

Welcome from Knoxville

I have got one, nice shooting gun.

I mostly use Modern Warriors off of 96 in Franklin. I wish it was outdoors, but the convenience is hard to beat, and works with my work schedule.

Welcome to TGO

Welcome from Nashville. Which range(s) do you like to go to?

Sold

At my age, I’m past being concerned if I don’t look manly enough by using a pad when I’m shooting. I’d rather protect my shoulder and be able to get out to the range whenever I can vs. having to take a pass because I’m too sore, or doing long term damage. As @Garufa says, a lot depends on the platform, and I’ll add proper technique goes a long way. My M14 in 7.62mm/.308 has a real punch. I came up with a pad I can wear on my shoulder using an elbow pad and old elastic belt. It’s thin enough that I can get the stock seated properly, but thick enough to take the edge off the recoil. In the winter when I’m shooting with a sweater on, I don’t really need it, but in warm weather with just a t-shirt on, it really helps.

SOLD!

No, this one doesn't include a power supply for use in the house. It being a 50w mobile though, it only requires an 11amp 12v power supply for use in the house. However, my advice if you're just getting into it...get at least a 23-30amp power supply so you can run a 100w HF rig in the house down the road as you progress into the hobby. As you do grow in the hobby and get more radios, having a decent power supply up front makes things easier down the road. I have upgraded my home power supply more times that I care to admit over the 12-13 years I've been doing it. I finally just broke down and get a Aston 50amp rack mount powersupply which set me back about $600 but it lets me power lots of radios at once (transmit on one at a time). For a good beginner power supply, I really like the Powerwerx 30amp and it's relatively inexpensive for what it is (smaller home station). I'll link it below. I used one of these for years and while it is a switcher (a linear power supply is better), it's still a really good one. https://powerwerx.com/ss30dv-desktop-dc-power-supply-powerpole?gad_source=1&gad_campaignid=22365243086&gbraid=0AAAAAD_u17cCa22Ttx8QSuiXaID20m9OV&gclid=Cj0KCQjwyIPDBhDBARIsAHJyyVjf3oEY4kr22DqDCFqjRqk2Qt_8LdR8tDgskMOuvZPUVK5P-v8c1nMaAnOOEALw_wcB

Dang, idk how I didn't see this on here. If the deal falls though, please let me know.

This is what I think, to be honest. At least a couple of of Suppressor company were caught trying to quash the HPA in the House Reconciliation bill. One of them happens to be in John Thune’s state. Wouldn’t be a bit surprised that a “ campaign donation” was made to him and others. I also won’t be surprised if Mrs. MacDonough is fired after this travesty is signed into legislation. That’s of course, it gets enough Republicans votes. The non-partisan CBO says it’s going to increase the national debt by 3.3 Trillion by the year 2035. Some budget hawks are not happy and the margin is razor thin. I will not cry if it doesn’t pass.

I sent this to our Senators; I am very disappointed in the US Senate allowing an appointed liberal to divert progress against the infringements on our God given right to keep and bear arms. The NFA of 1934 was written to combat a problem created by the US congress with prohibition. Specifically, making certain legal firearms illegal in an attempt to protect authorities from organized crime that grew powerful by making money smuggling alcohol. If we look at historic court rulings and Constitutional amendment, we can see that it is Unconstitutional to attach a fee, tax, or test to any Constitutionally guaranteed right. The NFA goes against the Constitution and needs to be overturned. It seems our court system while being protective of the right to vote, have a blind spot to "shall not be infringed" so it is up to congress to strike the NFA in it's entirety. Joe Biden was a liar, Cannons were perfectly legal for citizens to own. Our founders wanted the populace to be able to defend themselves and their country. Make it right.

Someone educate me, please. This parliamentarian dudette removed the part that took this stuff out of the NFA, but left in a reduction in the tax cost? Why the hell do we even allow a lib to be in that position when. We control the senate?

Agreed, lesser of 2 evils. I will say, however, that the time to vote your conscience is in the GOP primary. The moderate/RINO seems to keep winning the big nominations instead of the conservatives.

The longer I live the more I wish I lived in the days of the past. The days when the Constatuon was the law of the land. When laws were not made up by the unelected. When the legislator did not pass laws that punished us for the crimes of the criminal I believe as long as poor candidates are presented to us to vote we will never get back the rights we've lost. The second amendment was written in a way to cover everything, not just firearms.

Voting for Democrats is a definite loser- Just look at the disaster any Democrat run city or state leaves- So not voting for the Conservatives is also not the answer-

I don't believe there's enough suppressors and SBRs sold yearly for the tax revenue to be the reason it was removed. I don't believe the GOP ever expected it to pass from the get-go. I think they just put it in there to have a bargaining chip they were willing to concede on to get the rest of the bill passed. They only succeeded at making the Dems continue to look like the 2A enemies they are and they got to pose as our 2A allies for a few weeks.

I’ve called and emailed Senators Marsha Blackburn and Bill Haggerty and Tim Burchett. Basically saying this. Please pressure Senate Leader John Thune to remove Elizabeth MacDonough from her position of Senate Parliamentarian and restore the original wording for the SHORT Act and HPA to the Big Beautiful Bill. I have never been more disappointed in the RNC in my life! The RNC is in serious jeopardy of losing my vote in the coming midterms and possibly for good! I have also emailed John Thune basically saying the same thing and also posted the same thing on Twitter (X).

Yep,I always keep my expectations low that way I’m never disappointed.

The Durham County GOP had a raffle. They would give away one gun a day through May. $30 a ticket. They texted me that I had won a Winchester Defender pump action 12ga. I was so excited. I picked up the shotgun and bought 100 rounds of 00 buck shot. Unfortunately, I just had my shoulder replaced and cannot shoot it until September. I have a few shotguns but not a 12ga pump. This Defender is made in Turkey. I have a Remington Wingmaster 16ga that I have had since the 1960s. It is smooth as butter and will rack a shell with one hand. When I raise it to my shoulder I am automatically looking down the barrel. It is a beautiful shotgun that has put a lot of meat on the table. This Defender......not so much. I am 6'2" and I have to reach for the forearm to rack the slide. There is nothing smooth about this shotgun. I could buy a new stock for it but that would cost as much as the gun is worth. I think it needs some breaking in, so in September I'm going to run that buck shot through it. It is camouflaged, so I got that going for me.