Leaderboard

Gone,   http://www.nytimes.com/2014/02/24/business/media/piers-morgan-and-cnn-plan-end-to-his-prime-time-show.html?hp

Let the war begin.

  Not a thing wrong with you. I am the same way - got everything I want. Haven't bought a gun in three years and haven't seen anything I gotta have.   It's called being content.

Hope none of those nice Libtards get shot.

Ohhhh how will I make it home with all these tears in my eyes!? :rofl:

I'm pleased with what I have, and really don't have any use for any more. That being the case, I'm always looking for just one more.

Legally you can't and not supposed to be able to buy the vials separate. Being radioactive I believe there is only one or two authorized companies that can handle tritium for domestic commercial purposes. IIRC

I don’t have a roll cage or a HANS head-restraint in my car either. I live on the edge though; I only carry one firearm at a time with no extra mag and I have been known to run with scissors.

Three words: Bulletproof princess backpack Sent barefoot from the hills of Tennessee

Buddy of mine had his house broken into two years ago. Stole a guitar, computer, tv, and some other stuff. Found his guitar on Craigslist at a pawn shop witch lead to the thief's arrest. Guy got probation and court cost, that was it. These scum do it because there is very little penalty. Hope this joker get more.

No Josey Wales ???

David is one of the nicest people I have ever met.   He treats my grandson Cameron like his own grandchild.      I can't say enough about how good he is to deal with.  One of the best men I know.   Buy from him with confidence!

    Mine are quite well protected.  My wife keeps them in her purse.  I don't really need them anymore anyway...

[quote name="theconstitutionrocks" post="1105133" timestamp="1391357454"]I generally tend to agree...if I'm going to be static in a confined area (ie movie theater...go figure) where cover or movement is limited or non-existant, then I'm wearing a vest. If I'm mobile, probably not, unless there is a significant potential threat...(going to recover the daughter and broken down car in the hood at 1 am in which case there is definitely a ..."WTF were you doing in this part of town at this hour..." ass chewing that is going to occur). With regard to being mobile, the tactical response in my view is get the hell out of the area first (it is NOT my job to move towards gunfire). If I can't do that, it is to take up a covered/concealed position which causes a "fatal funnel" for the bad guy and the element of suprise and oppportunity to shoot first, at fairly close range to ensure good shot placement and multiple hits (preferably the head) because I don't know if he is wearing body armor or not.[/quote] Body armor? Head shots?? I'm not being rude, but what kind of place do you live in? The world is a dangerous place, and carrying a firearm is just smart practice. But if you are in a place where you feel the need for body armor, then your gonna need a rifle. And head shots? I can't think of a single instructor I have ever heard in the civilian world or while I was in the Marines, that would advocate trying to get head shots. Especially using a pistol in a self defense situation. Tapatalk ate my spelling.

Mobility and comfort are my big things. A pistol is a defensive weapon. If I think I'm gonna need body armor, I'm probably gonna need a rifle. Tapatalk ate my spelling.

Found this tonight have seen pictures but have never actually had one in hand. Been thinking of trying a 17hmr revolver for a while. Well once I got it in my hand I was not going to give it up. Ruger hunter 17hmr.

7 boxes of Blazer 22lr 50rds for 2.47 a box. Also independence 5.56 for 7.37 a box of 20. 4 boxes of 9mm federal 13.77 for 50, 357 magnum jsp and jhp, 38 spc +P. Sent from my SCH-I545 using Tapatalk 2

  Yep. My favorite so far... "Go home you limey bastard!"

I call B.S. on this. A lot of the quote comes from Bernd Osterloh, head of VW’s works council, that is, one of the German Union folks. Of course he's going to bad-mouth the vote. I'm thinking Senator Corker only said those things that were true that VW management was legally constrained from saying. Additionally, outside agitation? Give me a break. The UAW from Chicago, and Obama, and the NLRB, have bigger and fatter fingers on the scales when it comes to outside influence.    IMO, the Chatt VW employees made the right call, and after some fits and starts, and after some screaming and yelling and jumping up and down, the right thing will eventually occur.

If we get capes and cloaks, can we get Kilts?   I think sewing the logo across the backside would keep us from getting shot from behind...     (I shall leave now...)

  Think he's qualified?

An old Indian Chief once said, "Only the white man would cut a foot off of a blanket, sew it on the other end and think he had a bigger blanket"

Dealer cost on one is $258.00.I would think you should be able to find one around $299-$319.

Deport his liberal pinko commie ass.

Sound fair, I have a stainless with a green lamented mannlicher stock I paid a bit less for.

[quote name="BigK" post="1115424" timestamp="1393169285"]I love me a good body armor thread. Lots of great ideas...just ordered 2 trauma plates and 2 princess backpacks from Amazon...one for the front one for the back. I sure do wish they had some molle on them, so I could mount my Battle Mug[/quote]no molle, but they do have Cinderella Sent barefoot from the hills of Tennessee

I hope you have the opportunity to edit this post from monotonous to monogamous before your wife reads it. Lol.

Glad you took car of it. I would've told the parents what the kids did.

I have pics of those "dirt scratching" turkeys destroying my food plot. I'll post those up soon.   Dave

Wow! Dolomite, that makes every TC Contender - Encore frame a mystery! I would imagine that thinking a frame was a pistol could cause one to pay more for it than they normally would, if they knew it could only be a long gun...legally. No doubt, there are probably people walking around with pistol barrels on rifle frames!   Does the factory publish the serial numbers somewhere, so that a person about to buy one from a pawn shop, or an individual , can tell what they're buying? It seems they would have marked the frames some way so a person could tell which frame they were looking at.

What about Shane?

  Well, actually, from Nov. to March after you go up the mountain from Kingston, you become two hours different than the neighboring states from where you began. :)   I don't see how a state being a hour different from all the other states in same time zone can do anything positive, but likely an extra hindrance and irritation in ways we haven't quite considered.   - OS

I don't comprehend what you are saying. :ugh:

"Fill yore hand, you sonofabitch!"

You left off Paladin. Either way I went with Roland Deschsain. Those gunslingers were some BA dudes.

Bottom line is this : If you are having problems with a driver , swallow your pride and pull over to the side of the road and let the "HARM" go away and never go in "HARM's" way . 

Thanks to the power of the internet we know who we are looking for and a warrant has been issued. I can post up the turds pic and info when I get to a computer.

I'm just sayin, if you're gonna have a sash ya ought to have a sword. I just seems right.

Shouldn't be hard to find that scumbag. That's some of the best video footage I've seen of a burglar. 

We all did notice how nice he dressed to go rob a house.  

Rusty or not all I can say is Momma had a big old gun and was sending hot lead down range for sure............ :up: :up: :up:

I'd love to go even though I'm not a morning person. :)   But not being able to exercise my TN limited 2A privileges there also dissuades me.   - OS

The only useful purpose of DST is to remind you to chance your smoke alarm batteries,   Course, there is also the conspiracy that DST is the government's way to keep the 9v battery market alive but I'm not one much for conspiracies.

I prefer DST.  If we were to stop doing DST, the "standard work day" needs to change from 8-5 to 6:30-3:30.   That's another reason why I hate winter...  I go to work in the dark and I come home in the dark. 

How about we compromise and have the entire country shift a half hour and leave it at that?

[quote name="Hozzie" post="1113328" timestamp="1392827795"]I can't stand Eastern Timezone where everything starts an hour late.[/quote] You mean on-time...;)

If I feel the desire to go someplace where body armor may be warranted, I'm probably going to stay home.

Okay boyo's let's do what we came here to do. Lets make us some zombie death pills! Safety is YOUR responsibility!!! Understand that because I'm not going to repeat it again. If you get toasted, don't start pointing your burnt stump at Caster. He told you not to screw around! The pot is hot. The ingots are melted. Remember the part about fluxing? Yeah, do it again. And again if something don't feel right. Cleanliness is important. Do you want a crusty booger that might have silica or ferrous material tear microscopic gouges out of your precious with every bang? Okay. Make sure your ladle is clean and dry and stick it in the pot to get warmed up. I like to prop my mold up on there too to soak up some heat. Giver a sec to get warm. Okay, pour the cavities full leaving a small puddle on top. It's very important to learn to get that right. Too little and the base of the bullet will not fill out. Too much transfers unnecessary heat, makes a mess and makes you look like a goon. Just cuz we rednecks don't mean we can't be professional. Now watch the puddle. See it change shades. Never open a mold while it's shiny you'll smear lead and/or tear a chunk from the base of the bullet. it should turn kinda dull, it'll look like a magic trick as it changes:) Like wise you don't wanna wait too long. If you see a plug torn from the base it's no good. That void will cause leading. A smooth flat base will hold while the powder burns but hot gases will push into the void and vaporize lead during ignition. It also causes inconsistent weights and uneven pressure on the bullet. All this affect accuracy. Some people hammer open the spru. They've done it for eons who am I to say different.....but I don't. I use an opened vise. Hold the mold by the handles, insert the spru head in the opening and pull. Reason I do this is two fold. First I'd rather not beat the crap out of my molds. It's unnecessary. Two is I want a smooth shearing action to give me the smoothest base possible. A smooth flat base is priority number one. And while we are on the subject of not beating up our molds. Never hit the mold body. Use your mallet to hit the hinge bolt on the mold handles to drop stuck stubborn bullets. And we do that over the water can. Just let them plunk right on in. Do it gently now and don't let the water splash. Also when, and it will happen, a drop of water hits the mold, wait until it quits sizzling. Pour molten lead in a cavity where there's water boiling and the steam will pop like a little firecracker which will make a bad bullet, scare the pee out of you and possibly pop hot lead on you. Don't do that. Well, how many you cast here is up to you, your patience and your supply. Don't worry about wrinkles and what not. Just learn the ropes. All bad bullets can be remelted until you get it right. Take this time to just learn and feel what's happening. I will say this. Cast two or three and drop them on a towel and let them air cool. We want them softer and in the continuing saga you'll see why.

Dear TGO Members... Tennessee Gun Owners is your organization. There is absolutely no need to seek administrative approval to organize local get togethers whether it be a trip to the range, lunch somewhere, dinner, a backyard BBQ, or whatever. We want you folks to get together in safe, friendly environments. Invite your non-firearms enthusiast friends! Bring your spouse, your kids, your significant other (but not at the same time as your spouse!). Get folks involved! The only things we ask are that: You assemble peaceably and in a legal fashion. You try to keep the event "Family Friendly" ... i.e. not at the local nudie bar You take pictures and post them in our gallery so everyone else can enjoy your fun! Please remember that if you assemble as TGO members, you're in essence representing this community. Do your best to put your best foot forward in the spirit of promoting a positive image of firearms owners and enthusiasts in the great state of Tennessee.