Leaderboard

yes and well worth it.. i'm able to shoot on my own property and I even built my own shooting range .. Life is good !

Nice photo, but I don’t think it is vintage.

If its for the wife, take her to the gun store and let HER pick what she likes.

SOLD

I would probably risk getting shot.

Terrible photo quality due to having to reduce the size of the image to get it to post here on the forum, but the dropbox as seen has been good to keep my two Malinois separated from the delivery people.

I like 38 Special and 357 Magnum. It's already been said. Pay attention to reliable data if you are handloading. I have three 357 Magnum revolvers that are mainly shot as 38 Specials. Defense loads are 357 rounds. To me, having a 357 revolver is the most versatile caliber in centerfire revolvers for ordinary use. I handload all my handgun cartridges. Reloading gives many more options over store bought cartridges. For one, I can continue to shoot in this famine. My 357's are a Model 28 Smith and Model 586. The Model 19 is a part time 357 Magnum. All my Ruger's are big single actions.

Do any of your scales go back this far?

SOLD Selling this 1993 Winchester Model 70 Super Grade 7MM Rem Mag out of the custom shop in New Haven Ct. Gorgeous wood, nearly perfect condition except for one scratch across the trigger guard as pictured. perfect bore. Includes Leopold rings and a vintage Leupold VX-III 3.5-10x50 scope. Comes with Winchester Letter. One problem it has: very front scope mount screw hole seems to be stripped out...will need gunsmith to re-tap to be perfect. It has jeweled bolt & follower, inletted swivel studs, and beautiful bluing.

My local taxidermist called today and said my deer was ready, been waiting to get him up on the wall. Anybody looking to have a quality mount done Byrds Taxidermy in Huntsville, TN is a good one.

Last one ... Taurus PT 92 AR (accessory rail) 9mm with 5 magazines (four 17round and one 10 round). Includes Fobus holster. $450 Price reduced to $400 firm .... SOLD Rockvale/Murfreesboro

For sale, or possible trade for 9mm (range or defense) ammo or 12 gauge shells (birdshot, buckshot, or slugs). Sellier & Bellot 12 GA Rubber Ball 2-3/4" 25rd box - $20 cash Sellier & Bellot 12 GA 2-5/8" Double Rubber Balls 25/box - $25 cash FTF Transaction preferred in Murfreesboro or Madison. Will ship if buyer pays actual cost of shipping.

Got an Email from Apps Training that they are opening a new gun shop at 2611 Lebanon Pk. This would put it across from Green Police Supply/Shpeley Donuts. Looks like it may also be a range. Guess with Buford gone and Const. Carry they are branching out,did not get any other info on it. This is Donalson but GPS is Nashville. Will check it out next week.

We have had a 3 person Early Rifle Elk Hunt donated to us by an outfitter near Missoula, MT that one of our committee members has worked for in the past. It is a backcountry hunt valued at $13,200, however, we will be selling chances on it for $50/chance and we are going to try and reward it at the banquet. Need not be present to win.

This fix will never work. Where's the duct tape and baling wire ...

Well for cost plus $50 I'll order one for you so there's no paper trail.

https://winchester.com/Support/Customers/Winchester-9mm-Luger-115-gr-Recall

The unfortunate thing is that the word won't get to everyone that bought. I wonder how many kabooms are gonna result. Nothing more dangerous than a squib.

https://wreg.com/news/tdot-fractured-section-of-i-40-bridge-removed-as-permanent-repair-plates-arrive-in-memphis/ So they are saying maybe open by July.

Given how fast they are likely trying to produce ammo right now, I'm not entirely surprised.

Sold sold sold exps3-4 with g33 magnifier.

All true. The GP100 was a solution in search of a problem. Ruger "bulked" up the GP100, which of course made it heavier. To compensate they did away with the grip frame, substituting the "peg" of the GP series. This made the gun front heavy, not nearly as well-balanced as the older Six series, all in the name of "strengthening" what was probably already the strongest medium frame revolver on the planet ...

You're a good man/friend Dirtshooter. Wish more people were like that. I was raised in the country on a farm, and we were taught the culture of helping and sharing with each other. When we killed a beef or some hogs. all of our neighbors got some free fresh meat.

This is the second thought I had after reading your post. Forum rules prevent me from posting a GIF that represents my first ...

agreed completely, current admin looks at 99% of stuff and we're all FUBAR

All this discussion about balances, and their accuracy takes me back to some of my chemistry classes in college. We sometimes used analytical balances, that read to 1/10000 of a gram. They were mounted on columns that were isolated from the rest of the building structure and were extremely sensitive. The lab instructors often recommended holding your breath while taking measurements, as even though the weighing pans were located behind glass doors, breathing on the machines would sometimes affect the readouts ...

Looks like a good picture in need of a caption.

Sounds like a happy ending to me

The GP-100 is a fine gun, but it always felt clunky to me. Its just awkward and heavy in my hand. The Six series guns are just so much more balanced and handle like a dream.

I have a beam scale. I bought a $20 Frankford Arsenal pocket scale from Midway just to see it in person. For years now, it's pretty much all I use. It's quick, easy, and accurate. I've become too lazy to drag out the beam scale. Dang! They've went up! That RCBS should be a good one.

Already been tried and largely abandoned. https://en.wikipedia.org/wiki/9×25mm_Dillon

The Alabama part was 'nuff said ...

21 to buy, 18 to own, car or elsewhere.

You should look at the Springfield Hellcat or Sig P365. Both have great round capacity for their size.

People I know with gates have a separate large drop box for packages. Dad wanted a gate but Mom got sick of messing with it so a large "private drive" sign wards off most folks.

I'm new here, and I know this is a necropost, but my experiences here are no less valid. Speaking as someone whom owns a 3D printer (a few years now), has printed miles of various filament, has milled and used Polymer lowers, as well as has been a machinist milling everything from wood to polys/plastics to metals from Aluminum to Titanium and Inconel, I have this to say..... 1) I will never use an 80% poly lower again for an AR. I have milled them drill press/cross slide vise style as well as with a router jig. I've had them come apart in as few as 15 shots (5.56N in a 16" carbine with adjustable gas block tuned to the ammo). Lucky I didn't take part of my cheek off with the bolt when the last one failed and the buffer loop came clean off. The only use I have for them anymore is dedicated .22lr plinker builds. I'm not even sure I would trust the resin mold kit that comes with metal reinforcing bits. Not all poly's are bad, the 80% Glock replicas seem to be OK. 2) For the same reason as above (times 100) I would not even consider using a 3D printed lower for anything other than a cosplay rig for some wannabe, or an Airsoft build or paint ball build might be OK. There are 6 or 7 different methods of 3D printing, however most DIY/homeowner 3D printers are Fused Deposition Modeling (FDM) AKA Fused Filament Fabrication (FFF). This method is what most people think of, with a spool (or a few spools) of filament material being fed into a heated nozzle and being deposited layer upon layer to build up the model/part. This is great for prototyping and doing one off stuff (see pic). Horrible for production unless you run a 'farm' (a warehouse full). This method has its drawbacks though. Even if you get good layer fusion, that part is still weak between the layers. When designing something for 3D printing, you need to keep this in mind and design/orient the part around this. I have yet to figure out how to FDM print a lower where this is not an issue. I have however printed some grips with out issue. Tried a 1911 style/angle grip on an AR. 3) 6061 billet and 7075 forged 80% lowers are so widely available and cheap there is almost no reason not to use them if you are considering a 'ghost gun'. Currently a forged raw (non anodized) lower can be had for $44 shipped, less in 5 packs (AAO Mfg). Yes the tooling/jig can get expensive. If you know someone who has one, it never hurts to ask. Likely they will rent it out for a reasonable price (with a u break it, u replace it clause), probably with direct guidance so you don't screw it up. Then you are not on the hook for all the tooling/fixtures, and they reduce their over all investment cost. With what I know now, I would way rather by a CNC machine and program a full lower milling from a 0% forging or block of billet than stick another poly on a battle rifle. 4) Legally speaking it is perfectly legal for you to manufacture a firearm from 0% or 80% using any material you want. Sale (and serialization) of that firearm is of course subject to Fed and State laws. 5) FDM printing is great for lots of stuff, like a spent primer catch for an old RCBS JR press, or any other little project you can come up with. I've made biscuit and cookie cutters, storage boxes for hearing aids and batteries, reload sorting blocks etc....as long as you design the part appropriately, it's great. Here is a project I did for myself using my printer. Yep, it flies.

Not sure what the interest level will be on here but have a 1985 Yamaha yz250 professionally restored. 100% redone. Started after restore then Pickled. Nice bike. 4250.00. Great piece for a collection, museum, or vintage racing.

What if I bought it from a scalper for a dollar a pop? Will I get my money back?

Does the AR stamped on the slide signify that it's an "assault rifle"?

So, you awake now, them ropes to tight, lets talk about what you tried to do last night!

Are you bragging or selling?

I once put "Sorry about your back" in the comments of a huge ammo order. lol